{"product_id":"t-mobile-v768-replacement-battery-37v-1200mah-li-ion","title":"T-Mobile V768 Replacement Battery 3.7V 1200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eT-Mobile V768 \/ Concord — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1200mAh Li-ion battery fits the T-Mobile V768, V768C, and Concord smartphones. It slots directly into the original battery compartment and connects to the existing charge management circuit. Capacity is rated at 4.44Wh, matching the original cell specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV768, V768C, and Concord compatibility:\u003c\/strong\u003e\n    All three models share the same 3.7V single-cell architecture, battery footprint (49.00 × 47.80 × 5.50 mm), and connector pinout — which is why one cell covers the full model range without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the V768 platform. The BMS accepted charge from the stock charger without fault, and the protection circuit tripped correctly at both the high-voltage and low-voltage cutoff thresholds.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first install:\u003c\/strong\u003e\n    After fitting this cell, run one full discharge to auto-off, then charge uninterrupted to 100%. The V768 fuel gauge IC is calibrated to the old cell's discharge curve — skipping this cycle causes the percentage indicator to read inaccurately for several days.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the V768 after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe V768 fuel gauge IC stores a charge model built on the previous cell's internal resistance profile. A new cell has a different voltage-under-load curve, so the IC miscalculates the remaining capacity. Under modem or screen load, the actual cell voltage drops faster than the gauge predicts, and the phone hits the hardware undervoltage cutoff before the OS reports empty. Running one full discharge-to-shutdown cycle forces the coulomb counter to relearn the new cell's curve. After that cycle, shutdowns at 20–30% typically stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone not powering on after the replacement cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If this battery was stored for several months before installation, the cell voltage may have dropped below 2.5V — the threshold at which the BMS engages a deep-discharge lockout to prevent cell damage. The phone will not power on and may not respond to the charger. Connect to a USB charger and leave it for 20–30 minutes without pressing the power button; the charge IC on the V768 runs a trickle pre-charge to lift the cell above 2.9V before allowing normal operation. If the phone still does not respond, confirm the charger is delivering at least 5V at the USB port.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405052903514,"sku":"BWCS-ZTU830SL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405052936282,"sku":"BWCS-ZTU830SL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405052969050,"sku":"BWCS-ZTU830SL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZTU830SL-1.webp?v=1779369899","url":"https:\/\/batteryweb.com\/products\/t-mobile-v768-replacement-battery-37v-1200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}