{"product_id":"tcl-u3a-replacement-battery-38v-1900mah-li-ion","title":"TCL U3A Replacement Battery TLI019D7 3.8V 1900mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTCL U3A \/ 5033 Series — 3.8V Li-ion Replacement Battery (TLI019D7)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 1900mAh Li-ion replacement battery for the TCL U3A and the 5033 series smartphones (5033T, 5033J, 5033A). It carries OEM part number TLI019D7 and matches the original cell's voltage, physical footprint (87.40 × 34.92 × 4.70mm), and connector pinout. If the original cell has degraded and the phone is shutting down early or no longer holding charge, this is the direct swap.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eU3A and 5033 series compatibility:\u003c\/strong\u003e\n    These models share the same battery bay dimensions, the same 3.8V nominal voltage rail, and the same TLI019D7 BMS connector. A single cell covers all variants without modification to the flex connector or housing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and load discharge on the bench. The BMS accepted charge handshake on the first cycle, held voltage above 3.6V under sustained screen and modem load, and tripped the low-voltage cutoff at the correct threshold without false triggering.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After fitting this cell, disable fast charging and run one complete discharge down to auto-off, then charge uninterrupted to 100%. This gives the phone's fuel gauge IC a clean reference curve for the new cell before high-current charging begins on an uncalibrated state-of-charge map.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the TCL 5033 and U3A\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is the most common symptom that brings people to a replacement cell. The original cell develops a steep voltage cliff — the open-circuit voltage looks acceptable, but under modem transmit or screen wake load, the cell can't sustain voltage above the BMS cutoff threshold. The phone interprets this as a hard undervoltage event and shuts down even though the fuel gauge still shows charge remaining. Replacing the cell removes the source of the sag; the BMS on a fresh cell sustains voltage through high-draw bursts without tripping.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone won't power on after the replacement cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge in storage. If this battery sat long enough to drop below approximately 2.5V per cell, the BMS enters a lockout state and blocks normal charge current to prevent damage. The phone will show nothing — no charging screen, no vibration. Connect to a wall adapter (not a PC USB port) and leave it for 15–20 minutes; the charge IC applies a trickle current that brings the cell back above the BMS recovery threshold. Once the screen shows a charging indicator, normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43392008454234,"sku":"BWCS-VOE900SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43392008487002,"sku":"BWCS-VOE900SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43392008519770,"sku":"BWCS-VOE900SL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VOE900SL-1.webp?v=1779142920","url":"https:\/\/batteryweb.com\/products\/tcl-u3a-replacement-battery-38v-1900mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}