{"product_id":"techcell-pr122dg-replacement-battery-74v-2000mah-li-ion","title":"Techcell PR122DG Replacement Battery 7.4V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTechcell PR122DG — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V 2000mAh Li-ion battery for the Techcell PR122DG portable survey and measurement instrument. It slots into the same bay as the original pack and connects to the same BMS handshake circuit. Capacity comes from the product specification: 2000mAh \/ 14.8Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePR122DG platform fit:\u003c\/strong\u003e\n    The PR122DG draws power through a regulated 7.4V rail that feeds both the measurement circuit and the display backlight simultaneously. This cell matches that nominal voltage and the connector pinout, so the instrument's internal regulation stage sees the same input it expects from the factory pack.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through probe-initialisation and sustained logging loads. The BMS held cutoff voltage above the instrument's low-voltage threshold and did not trip during the current spike at sensor power-up — the most common point of failure with off-spec cells.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst deployment after installation:\u003c\/strong\u003e\n    Run a full calibration cycle through the instrument menu before taking the unit into the field. The PR122DG maps battery state during calibration. Skip this step and the instrument will trigger premature low-battery warnings on the first measurement session, even with a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the PR122DG sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge at roughly 2–3% per month. Leave a pack in a case for six months or more and the cell voltage can drop below the BMS recovery threshold — typically around 2.5V per cell. When that happens, the BMS enters a protective sleep state and the instrument sees no pack at all. Connecting to a charger at this point may show no charging activity because the charger's detection circuit also reads zero voltage. The fix is to apply a slow pre-charge at around 0.1C using a charger that supports recovery mode, which nudges the cell voltage above 2.8V per cell and allows the BMS to reinitialise.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eReadings resetting or dropping out mid-logging session with no low-battery warning\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage sag issue, not a capacity issue. Under sustained sensor load — particularly when the probe module is actively sampling — current draw spikes momentarily and cell voltage dips below the instrument's dropout threshold for the measurement circuit. The display may stay on while the sensor data resets, which makes the fault look like a firmware issue. Check the pack's resting voltage first: a healthy cell at partial charge should sit above 7.2V at rest. If resting voltage is above 7.2V but sag still triggers dropouts, the internal resistance of the old pack has increased — swap to a fresh cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360796409946,"sku":"BWCS-LI1SL-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360796442714,"sku":"BWCS-LI1SL-2","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360796475482,"sku":"BWCS-LI1SL-3","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI1SL-1.webp?v=1778616259","url":"https:\/\/batteryweb.com\/products\/techcell-pr122dg-replacement-battery-74v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}