{"product_id":"techcell-pr122dg-replacement-battery-74v-3400mah-li-ion","title":"Techcell PR122DG Survey Battery 7.4V 3400mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTechcell PR122DG — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V 3400mAh lithium-ion battery for the Techcell PR122DG portable survey and measurement instrument. It fits the PR122DG directly and matches the original voltage and physical form factor. Capacity is 3400mAh (25.16Wh) as rated.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePR122DG platform fit:\u003c\/strong\u003e\n    The PR122DG runs a 7.4V two-cell Li-ion rail with a BMS that monitors cell balance and cut-off thresholds. This pack matches that voltage rail and connector pinout, so the instrument's power management circuit communicates with the battery the same way it does with the original.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack under sustained sensor-load conditions and monitored BMS behaviour through probe initialisation surges. The protection circuit held steady at the expected cut-off without tripping prematurely on the probe power-up draw spike.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration before field deployment:\u003c\/strong\u003e\n    After fitting this battery, run a full calibration cycle through the instrument menu before taking it into the field. The PR122DG maps battery state during calibration — skipping this step causes premature low-battery warnings during the first measurement session, even with a fully charged pack.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePR122DG shutting down mid-measurement despite showing charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the PR122DG activates a probe or sensor module, there is a brief but steep current spike as the module powers up. If the battery's BMS has a conservative over-current threshold — common in aged or deeply cycled packs — that spike trips the protection circuit and cuts power instantly. The instrument interprets this as a sudden power loss, not a low-battery event, so the display may have shown 50% or more before shutdown. A new pack with a fresh BMS resets those thresholds and handles the initialisation surge without tripping.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePR122DG won't recognise the battery after it sat unused for months\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage, and if the pack drops below roughly 2.5V per cell, the BMS enters a deep-sleep lockout state to prevent damage. In that state the instrument sees no valid battery signal and either refuses to power on or shows a battery error. To recover, connect the pack to a Li-ion charger that supports a pre-charge or recovery mode — this applies a low-current trickle until cell voltage climbs back above 3.0V per cell. Once voltage recovers, the BMS exits sleep and normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360748535898,"sku":"BWCS-LI1HL-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360748568666,"sku":"BWCS-LI1HL-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360748601434,"sku":"BWCS-LI1HL-3","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI1HL-1.webp?v=1778616259","url":"https:\/\/batteryweb.com\/products\/techcell-pr122dg-replacement-battery-74v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}