{"product_id":"telekom-speedbox-lte-mini-replacement-battery-37v-2600mah-li-polymer","title":"Telekom Speedbox LTE mini HB5P1H Compatible Battery 3.7V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTelekom Speedbox LTE mini \/ LTE+ mini — 3.7V Li-Polymer Replacement Battery (HB5P1H)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 2600mAh Li-Polymer replacement battery for the Telekom Speedbox LTE mini and Speedbox LTE+ mini mobile hotspots. It fits the HB5P1H slot directly and restores power when the original cell can no longer hold enough charge to sustain a session. Capacity figure comes from the product data: 2600mAh \/ 9.62Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpeedbox LTE mini and LTE+ mini compatibility:\u003c\/strong\u003e\n    Both models share the same battery bay dimensions, connector pinout, and BMS handshake protocol — the HB5P1H cell fits either variant without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this battery under a combined modem-plus-Wi-Fi load with four active client devices. The BMS held the voltage rail steady and did not trip the low-voltage cutoff during sustained data transfer.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eVentilation during long sessions:\u003c\/strong\u003e\n    Keep the hotspot on an open surface when clients are far from the unit — the LTE radio runs at full transmit power to maintain signal, and heat buildup in a pocket or bag accelerates cell degradation faster than normal use would.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eHotspot disconnecting clients mid-session on a new battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA freshly installed cell can still cause mid-session drops if the device is in a weak signal area. The LTE modem spikes current draw sharply when it renegotiates signal, and if multiple Wi-Fi clients are active at the same moment, the combined load causes a voltage sag. The BMS reads that sag as a low-voltage event and momentarily cuts output, resetting the radio stack. Relocating the hotspot closer to a window or reducing connected client count to two or three usually eliminates the sag.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSpeedbox LTE mini not powering on after sitting in a drawer\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells self-discharge at roughly 2–3% per month, so a hotspot stored unused for several months may fall below the minimum boot voltage. The device needs at least 3.2V across the cell terminals to initialise the modem firmware before it will power on. Connect the original charger and leave it for 20–30 minutes before attempting to start — most BMS controllers will accept a trickle charge at this voltage and recover to boot threshold without issue. If the charge indicator never lights, the cell has dropped below recovery voltage and replacement is the correct next step.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377872568410,"sku":"BWCS-HUE589SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377872601178,"sku":"BWCS-HUE589SL-2","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377872633946,"sku":"BWCS-HUE589SL-3","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HUE589SL-1.webp?v=1778773918","url":"https:\/\/batteryweb.com\/products\/telekom-speedbox-lte-mini-replacement-battery-37v-2600mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}