{"product_id":"telematrix-9600-replacement-battery-36v-700mah-ni-mh","title":"Telematrix 9600 Replacement Battery 3.6V 700mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTelematrix 9600 \/ 9621P — 3.6V Ni-MH Replacement Battery (BATT-9600)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 700mAh Ni-MH replacement battery for the Telematrix 9600 and 9621P cordless handsets. It replaces the original BATT-9600 cell pack when the handset no longer holds a usable charge. Dimensions are 45.10 × 31.40 × 11.00mm — confirm these against your existing pack before fitting.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e9600 and 9621P compatibility:\u003c\/strong\u003e\n    Both handsets run the same 3.6V single-cell Ni-MH configuration and use an identical connector and footprint, which is why they share one battery part number across the range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a 9600 handset. The battery accepted charge from the base station without error and the BMS held stable voltage across the full discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge conditioning on NiMH packs:\u003c\/strong\u003e\n    After fitting, seat the handset in the base and leave it for a full 16 hours before use. NiMH cells shipped in partial storage states need a slow first charge to reach rated capacity — skipping this step leaves you with noticeably shorter talk time from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange dropping after a battery swap on the 9600\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells that haven't been conditioned show a steeper voltage sag under RF transmit load. The 9600 handset draws a higher current burst during DECT transmission, and an under-conditioned pack can't sustain the voltage rail — so the transmitter steps back power. Run three to five full charge and discharge cycles through the base station before judging range. Voltage stabilises across the pack after conditioning and the transmit power holds at its normal level.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no-charge or error light with new battery installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eBatteries stored for extended periods can arrive with a cell voltage below the threshold the Telematrix base station accepts as a valid charge target. The base reads the pack as a fault rather than a depleted cell and refuses to charge. Place the handset in the base anyway and leave it undisturbed — most base stations will re-attempt charge detection after 10 to 15 minutes and pick up the pack once voltage climbs above roughly 3.0V. If the error persists past 30 minutes, remove the handset, wait one minute, and reseat it to trigger a fresh detection cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339910807642,"sku":"BWCS-TPN960CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339910840410,"sku":"BWCS-TPN960CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339910873178,"sku":"BWCS-TPN960CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TPN960CL-1.webp?v=1778366945","url":"https:\/\/batteryweb.com\/products\/telematrix-9600-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}