{"product_id":"telemotive-10k12ss02p7-replacement-battery-72v-2000mah-ni-mh","title":"Telemotive 10K12SS02P7 Replacement Battery 7.2V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTelemotive 10K12SS02P7 \/ AK02 — 7.2V Ni-MH Replacement Battery (BT10KP-1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.2V, 2000mAh Ni-MH replacement battery for Telemotive crane remote controls. It fits the 10K12SS02P7, AK02, GXZE13653-P, and SLTX Transmitter models, replacing OEM part numbers BT10KP-1 and BT10KP-0. Capacity and dimensions match the original pack: 90.30 × 52.90 × 19.50 mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10K12SS02P7, AK02, and SLTX platform fit:\u003c\/strong\u003e\n    These Telemotive remotes share the same battery bay dimensions, 7.2V NiMH cell configuration, and connector pinout. Swapping between models in this family does not require rewiring or hardware modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge on a Telemotive-compatible test rig. The BMS held voltage above 6.8V under solenoid-activation load spikes without tripping cutoff at rated capacity.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eMonthly charge cycle for idle remotes:\u003c\/strong\u003e\n    Crane remotes often sit unused for weeks. NiMH cells self-discharge at roughly 1–3% per day. If this remote sits more than three weeks without use, put it on the charger before the next job — cells that drop too low may read as dead to the charger and need a conditioning cycle to recover.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSolenoid activation causing power dropout on a freshly installed battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen a crane remote triggers a solenoid or contactor, the inrush current is brief but sharp — often 3–5× steady-state draw. A NiMH cell at storage voltage (typically around 7.0–7.1V for a 6-cell pack) has higher internal resistance than a fully charged cell at 8.4V. That resistance amplifies the voltage sag during the inrush event. If the sag crosses the BMS undervoltage threshold, the remote cuts out mid-command. Fix: charge the battery fully before first use and verify open-circuit voltage reads 8.2V or higher before operating the crane.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRemote shows low-battery warning immediately after swapping in this pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA replacement NiMH battery ships at partial storage charge — typically 40–60% capacity. The remote's voltage sensor reads this as low-battery because resting voltage at 50% charge on a NiMH pack sits close to the warning threshold. This is not a fault with the cell. Place the battery on its charger for a full cycle before use. Once the pack reaches full charge, open-circuit voltage should sit between 8.2V and 8.6V and the low-battery indicator will clear.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360052084826,"sku":"BWCS-TEK100BL-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360052117594,"sku":"BWCS-TEK100BL-2","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360052150362,"sku":"BWCS-TEK100BL-3","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TEK100BL-1.webp?v=1778610770","url":"https:\/\/batteryweb.com\/products\/telemotive-10k12ss02p7-replacement-battery-72v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}