{"product_id":"telenor-touch-plus-replacement-battery-37v-1500mah-li-ion","title":"Telenor Touch Plus Replacement Battery 3.7V 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTelenor Touch Plus — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 1500mAh Li-ion cell replaces the factory battery in the Telenor Touch Plus smartphone. It restores power to the device when the original cell no longer holds a usable charge. Dimensions are 41.00 x 51.00 x 6.00mm — confirm these against your existing cell before fitting.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTouch Plus fitment:\u003c\/strong\u003e\n    The Touch Plus runs a single-cell 3.7V Li-ion architecture with a direct connector to the charge IC. This cell matches that voltage rail and physical footprint so the board sees no mismatch on power-up.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the Touch Plus platform. The BMS accepted charge normally, and the protection circuit triggered correctly at the low-voltage cutoff threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    On first use after fitting, run one full discharge down to auto-shutdown, then charge uninterrupted to 100% before using the phone. This lets the fuel gauge IC map its calibration points against the new cell's actual discharge curve.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Touch Plus after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA new cell has a different internal resistance profile than the aged cell the fuel gauge IC was calibrated to. When the modem fires a data burst or the screen peaks in brightness, the new cell briefly sags in voltage. The fuel gauge reads that sag as a critically low state-of-charge and triggers an emergency shutdown — even though the cell has capacity remaining. One full discharge-charge cycle resets the coulomb counter reference points and eliminates most of these false-floor shutdowns.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone will not power on after the replacement cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge in storage, and if the replacement shipped or sat below 2.5V per cell, the BMS enters a lockout state to prevent damage. The phone will not respond to a normal power press. Connect the phone to a wall charger — not a computer USB port — and leave it for 20–30 minutes without pressing anything. The charge IC will trickle current into the cell until it clears the BMS lockout threshold, typically around 2.9V, at which point the screen will show a charging indicator.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405070991450,"sku":"BWCS-ZTN760SL-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405071024218,"sku":"BWCS-ZTN760SL-2","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405071056986,"sku":"BWCS-ZTN760SL-3","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZTN760SL-1.webp?v=1779369934","url":"https:\/\/batteryweb.com\/products\/telenor-touch-plus-replacement-battery-37v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}