{"product_id":"telstra-tough-3-replacement-battery-37v-1850mah-li-ion","title":"Telstra TOUGH 3 Replacement Battery 3.7V 1850mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTelstra TOUGH 3 \/ T55 \/ T82 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1850mAh Li-ion cell replaces the original battery in the Telstra TOUGH 3, T55, and T82 rugged smartphones. All three models share the same battery bay dimensions and connector, making this a single compatible cell across the range. Capacity is rated at 6.85Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTOUGH 3, T55, and T82 compatibility:\u003c\/strong\u003e\n    These three handsets use the same 3.7V cell with identical physical dimensions (63.30 × 41.00 × 6.10mm) and the same connector orientation. The BMS negotiation protocol is shared across this lineup, so one cell covers all three without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the TOUGH 3 platform. The BMS accepted the cell on first insertion, charge termination triggered correctly at full capacity, and the protection circuit responded to overcurrent draw without false trips.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    On first use, disable fast charging and run one full discharge-to-charge cycle before resuming normal use. The fuel gauge IC on the TOUGH 3 is calibrated to the old cell's discharge curve — skipping this step causes the coulomb counter to report inaccurate percentages until it relearns the new cell's behaviour.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Telstra TOUGH 3\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff failure, not a capacity problem. When the cell voltage drops faster than the fuel gauge IC expects under modem or screen load, the phone cuts power before the displayed percentage reaches zero. An aged or deeply discharged cell has higher internal impedance, which causes voltage to sag sharply during high-current draws. The BMS sees the voltage floor breach and shuts down — even though the gauge still shows charge remaining. Run one full calibration cycle after installation to give the fuel gauge IC an accurate voltage-versus-capacity map for the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone won't power on after sitting in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the battery self-discharged below approximately 2.5V during storage, the BMS enters a lockout state and blocks normal charging to protect the cell. The phone will appear completely dead — no boot screen, no charging indicator. Connect to a charger and leave it for 20–30 minutes without attempting to power on. Most chargers deliver a trickle pre-charge current below 100mA to bring the cell back above the BMS recovery threshold, after which normal charging resumes. If the phone still shows no response after 45 minutes on charge, measure the charge port voltage — a healthy charger should read between 4.9V and 5.1V at the port.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405034717274,"sku":"BWCS-ZTV800SL-1","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405034750042,"sku":"BWCS-ZTV800SL-2","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405034782810,"sku":"BWCS-ZTV800SL-3","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZTV800SL-1.webp?v=1778773940","url":"https:\/\/batteryweb.com\/products\/telstra-tough-3-replacement-battery-37v-1850mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}