{"product_id":"telxon-tsc1-data-collector-replacement-battery-74v-2600mah-li-ion","title":"Telxon TSC1 7.4V 2600mAh Li-ion Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTelxon TSC1 Data Collector — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 2600mAh Li-ion battery replaces the original pack in the Telxon TSC1 handheld data collector. The TSC1 is used in warehouse and retail environments for inventory management, asset tracking, and field data collection. Capacity and voltage figures are taken directly from the product specification — 19.24Wh total energy.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTSC1 platform fit:\u003c\/strong\u003e\n    The TSC1 runs a single battery bay with a direct voltage rail feed to the main board. This pack matches the 7.4V nominal output and the physical footprint — 70.40 × 38.70 × 20.50mm — required to seat correctly and make contact with the terminal block.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the TSC1's power-on sequence and simulated a scan-heavy load. The BMS held stable across repeated barcode scan bursts and USB data transfer draws without triggering a premature cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst deployment tip:\u003c\/strong\u003e\n    After installing the new pack, run a full system initialisation through the TSC1's setup menu before field use. The device maps battery state during that sequence — skipping it causes premature low-battery warnings during the first active shift even when the pack carries a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff when the TSC1 scanner module initialises\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe TSC1's barcode scanner module draws a short current spike at power-up as the laser or imager initialises. On a degraded original pack, internal resistance is high enough that this spike pushes the BMS over its cutoff threshold. The device shuts off immediately after the scanner activates, even with a full charge showing. A new cell with low internal resistance absorbs that transient without the BMS tripping — confirmed during our bench cycle under repeated scan-trigger loads.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTSC1 won't power on after sitting unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells left in storage self-discharge over time. If the pack drops below approximately 2.5V per cell, the BMS enters a locked sleep state to prevent damage and will not respond to a normal charge attempt. Connect the charger and leave it for at least 30–40 minutes — most chargers deliver a low preconditioning current that recovers the cell voltage back above the BMS wake threshold. Once the pack reaches roughly 3.0V per cell, normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360792576090,"sku":"BWCS-LI1XL-1","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360792608858,"sku":"BWCS-LI1XL-2","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360792641626,"sku":"BWCS-LI1XL-3","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI1XL-1.webp?v=1778616260","url":"https:\/\/batteryweb.com\/products\/telxon-tsc1-data-collector-replacement-battery-74v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}