{"product_id":"terrans-force-dr7-plus-77sh2-replacement-battery-111v-4400mah-li-ion","title":"Terrans Force DR7 PLUS 77SH2 Replacement Battery 11.1V 4400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTerrans Force DR7 PLUS 77SH2 — 11.1V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V 4400mAh (48.84Wh) Li-ion battery replaces the original cell in the Terrans Force DR7 PLUS 77SH2 and related DR7 PLUS variants. It fits the DR7-PLUS-77SH1, DR7-PLUS-87SH1, and additional DR7 PLUS models sharing the same battery bay and connector. Capacity figures come from the product data — not estimated from third-party sources.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDR7 PLUS series compatibility:\u003c\/strong\u003e\n    These DR7 PLUS variants share the same 11.1V three-cell architecture, physical connector, and BMS handshake protocol. Swapping between them does not require firmware changes — the voltage rail and cell count match across the series.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge-discharge cycles on a DR7 PLUS platform. The BMS accepted the new cell without a protection-trip fault, and the charge controller reached full termination voltage without stalling.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration cycle:\u003c\/strong\u003e\n    After fitting this battery, run the laptop down to hibernate cutoff — do not force-shutdown — then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning the firmware throws after every cell swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting poor battery health immediately after swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen a new cell goes in, the BIOS still holds EEPROM data from the old battery — cycle count, wear level, and estimated capacity. It compares incoming readings against that stale profile and flags a health warning before the fuel gauge IC has any real data to work with. One full discharge-to-hibernate followed by an uninterrupted charge gives the firmware enough data to rewrite that profile. After two or three cycles, the health report stabilises and reflects the actual cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop shutting down at 20–30% shown on the gauge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff under combined CPU and display load — not a fault with the cell itself. The fuel gauge IC tracks charge by voltage curve, but a new cell's curve doesn't match the table the firmware learned from the old battery. Under heavy load, voltage sags past the low-battery cutoff threshold before the displayed percentage reaches zero. Run two full calibration cycles as described above, and the gauge IC recalibrates its discharge curve. After calibration, the cutoff should align with readings below 10%.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409603199066,"sku":"BWCS-CLN855NB-1","price":73.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409603231834,"sku":"BWCS-CLN855NB-2","price":86.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409603264602,"sku":"BWCS-CLN855NB-3","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CLN855NB-1.webp?v=1779580170","url":"https:\/\/batteryweb.com\/products\/terrans-force-dr7-plus-77sh2-replacement-battery-111v-4400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}