{"product_id":"thomson-ldx-110-replacement-battery-144v-10400mah-li-ion","title":"Thomson LDX-110 Camera Compatible Battery 14.4V 10400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eThomson LDX-110 \/ LDX-150 Series — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V, 10400mAh (149.76Wh) Li-ion battery fits the Thomson LDX-110, LDX-120, LDX-140, and LDX-150 broadcast and ENG cameras. It replaces a failing or degraded original cell, restoring power to the imaging sensor, recording functions, and onboard electronics. Capacity figure is from product data — not estimated from web sources.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLDX-110 through LDX-150 platform fit:\u003c\/strong\u003e\n    These four camera bodies share the same 14.4V battery form factor, connector pin layout, and BMS communication protocol. One cell works across the series without adapters or modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the LDX platform. The BMS handshake completed cleanly, protection circuits triggered correctly at low-voltage cutoff, and the camera body reported battery status without errors after the first full charge cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle for LDX bodies:\u003c\/strong\u003e\n    Thomson LDX cameras can map the battery-remaining display incorrectly on a fresh cell if the first charge is done outside the camera body. Perform the initial charge with the battery seated in the camera or an OEM-compatible charger to let the BMS calibrate the charge curve accurately.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the LDX-series battery indicator stays stuck at 100% then drops suddenly\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThomson LDX cameras use voltage-threshold mapping to estimate remaining charge. A new Li-ion cell with a slightly different discharge curve can hold a higher plateau voltage longer than the original cell, causing the indicator to read full until it crosses a threshold and drops sharply. This is not a fault — it is a calibration gap between the new cell's discharge curve and the camera's lookup table. Running two or three full charge-to-discharge cycles through the camera body narrows this gap noticeably. After conditioning, the indicator will step down more evenly across the cell's usable range.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera body showing 'no battery' or refusing to power on with a new cell installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLDX bodies perform a BMS authentication check on power-up. If the cell ships in a partial state of charge, the camera may not read enough voltage to complete the handshake and will display a no-battery or incompatible-battery warning. Remove the battery, charge it fully in an OEM-compatible charger until the charge indicator confirms completion, then reinsert. If the warning persists after a full charge, power-cycle the camera body with the battery seated — this clears the handshake cache and forces a fresh read. Target a full charge of approximately 16.8V before reinserting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333718311002,"sku":"BWCS-BPL90MC-1","price":170.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333718343770,"sku":"BWCS-BPL90MC-2","price":202.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333718376538,"sku":"BWCS-BPL90MC-3","price":225.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BPL90MC-1.webp?v=1778213015","url":"https:\/\/batteryweb.com\/products\/thomson-ldx-110-replacement-battery-144v-10400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}