{"product_id":"tineco-pure-one-s12-replacement-battery-216v-2000mah-li-ion","title":"Tineco Pure One S12 Replacement Battery 21.6V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTineco Pure One S12 Series — 21.6V Li-ion Replacement Battery (ZB1873-6S1P-0)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 21.6V, 2000mAh Li-ion replacement battery for the Tineco Pure One S12 and Pure One S12 Pro cordless stick vacuums, also fitting the S1 and X1 series. It slots into the original battery bay and connects to the same BMS interface the vacuum expects. Capacity is 2000mAh (43.2Wh), matching the factory specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eS12, S12 Pro, S1, and X1 compatibility:\u003c\/strong\u003e\n    These models share the same 21.6V cell architecture, identical battery bay dimensions, and the same BMS communication protocol — which is why a single replacement cell covers the range. The connector and handshake are not interchangeable with other Tineco lines.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge cycles on the S12 platform and confirmed the BMS handshake initialised correctly on each cycle. The protection circuit responded to overcurrent conditions as expected — cutting and recovering without triggering a fault lock.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on the S12:\u003c\/strong\u003e\n    Do not leave the S12 sitting on the charging dock between uses. Continuous dock charging delivers a low-level trickle after the cell reaches full, and Li-ion cells held at 100% under trickle charge lose capacity noticeably faster. Charge to full, remove the battery or the vacuum from the dock, and reconnect only when depleted.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe S12 motor draws peak current during high-suction passes, especially on carpet or when the filter is partially blocked. A degraded or partially discharged cell cannot hold voltage under that load — it sags below the motor controller's minimum threshold and the vacuum reduces power before the indicator registers low. This is a load-voltage issue, not a charge-level issue. Clean the filter first; if suction is still inconsistent at mid-charge, the cell is no longer holding voltage under draw and needs replacement.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a mechanical fault. When the filter is restricted, the motor works harder to maintain suction and pulls more current than the cell's protection circuit allows. The BMS cuts the circuit to protect the cell, waits a few seconds, then resets. The cycle repeats until the load drops. Wash or replace the filter — if cut-outs continue on a clean filter, check that cell voltage reads above 21V on a multimeter after a full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427979984986,"sku":"BWCS-TNS120VX-1","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427980017754,"sku":"BWCS-TNS120VX-2","price":104.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427980050522,"sku":"BWCS-TNS120VX-3","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TNS120VX-1.webp?v=1779933696","url":"https:\/\/batteryweb.com\/products\/tineco-pure-one-s12-replacement-battery-216v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}