{"product_id":"tiptel-6021-replacement-battery-37v-900mah-li-ion","title":"Tiptel 6021 3.7V Replacement Battery 900mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTiptel 6021 \/ 6050 \/ 6120 \/ 6121 Series — 3.7V Li-ion 900mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 900mAh Li-ion cell for the Tiptel 6021 and related handsets. It fits the 6021, 6050, 6120, and 6121 alongside four additional models in the same series. Dimensions are 53.00 × 34.00 × 4.30mm — measure your original before fitting.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e6021 \/ 6050 \/ 6120 \/ 6121 platform fit:\u003c\/strong\u003e\n    These models share the same battery bay dimensions, connector pin-out, and 3.7V single-cell architecture. The BMS handshake on each expects the same charge termination voltage, so one cell revision covers the whole group.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a 3.7V single-cell platform. The BMS accepted charge termination at 4.2V and triggered low-voltage cutoff cleanly without hanging the charging circuit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first use after installation, disable fast charging and run one full discharge-to-charge cycle. The fuel gauge IC is calibrated to the old cell's discharge curve — one complete cycle lets it map the new cell's characteristics before reporting accurate percentages.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Tiptel 6021 after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Tiptel 6021's fuel gauge IC stores a discharge curve from the previous cell. After a swap, the reported state of charge does not match the new cell's actual voltage profile. When the modem transmits or the screen backlight peaks, current draw causes a voltage sag the old curve did not predict. The phone interprets the sag as a hard undervoltage event and cuts power before the display reaches 0%. One full supervised discharge cycle — down to automatic shutoff, then a full charge — forces the coulomb counter to resync to the replacement cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone not powering on after the replacement cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If this battery dropped below approximately 2.5V per cell before installation, the BMS may have entered lockout to prevent damage. The phone will show nothing when you press the power button — no logo, no charging animation. Connect it to a wall charger rated at 5V and leave it for 15–20 minutes without interruption; the BMS needs a trickle current to recover enough voltage to re-initialise before the phone will respond.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405014990938,"sku":"BWCS-DEP510SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405015023706,"sku":"BWCS-DEP510SL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405015056474,"sku":"BWCS-DEP510SL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DEP510SL_1.webp?v=1779369805","url":"https:\/\/batteryweb.com\/products\/tiptel-6021-replacement-battery-37v-900mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}