{"product_id":"tp-link-neffos-y5-replacement-battery-385v-2050mah-li-polymer","title":"TP-Link Neffos Y5 Compatible Battery NBL-39A2130 3.85V 2050mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTP-Link Neffos Y5 — 3.85V Li-Polymer Replacement Battery (NBL-39A2130)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.85V, 2050mAh Li-Polymer cell built to replace the original NBL-39A2130 in the Neffos Y5 smartphone. It fits directly into the Y5 handset — same connector, same footprint at 62.22 x 63.60 x 3.90mm. Use this when the original cell no longer holds a usable charge or causes unexpected shutdowns.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNeffos Y5 fitment:\u003c\/strong\u003e\n    The Y5 uses a dedicated connector and a BMS that handshakes with the phone's charge IC at 3.85V nominal. Swapping in a cell at the wrong voltage rail or with an incompatible BMS profile trips a charge fault. This cell matches the original voltage and connector spec to avoid that.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the Neffos Y5 platform. The BMS accepted the charge handshake cleanly on the first cycle, and charge IC communication stayed stable under normal screen-on and modem load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after install:\u003c\/strong\u003e\n    On first use after installation, disable fast charging for one complete discharge-charge cycle. The fuel gauge IC is calibrated to the old cell's discharge curve. Running one slow cycle first lets it map the new cell's actual capacity before high-current charging is applied to an uncalibrated state.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Neffos Y5 shuts down suddenly at 20–30% after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the fuel gauge IC is still running the discharge curve from the old, degraded cell. The new cell has a steeper voltage drop under modem and display load at lower states of charge. When voltage dips below the phone's hardware cutoff threshold — typically around 3.2–3.3V under load — the device shuts off even though the percentage shown looks safe. Running one full discharge to 0% and a full charge to 100% without interruption resets the coulomb counter and aligns reported percentage with actual cell voltage.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone won't power on after the replacement cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells self-discharge during storage. If voltage has dropped below approximately 2.5V, the BMS enters a lockout state to prevent damage and the phone will not respond to a power button press. Connect the phone to a wall charger — not a PC USB port — and leave it for 15–20 minutes without attempting to power on. The charge IC needs to trickle current into the cell until voltage climbs back above the BMS recovery threshold, typically 2.8–3.0V, before normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391988957274,"sku":"BWCS-TPY510SL-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391988990042,"sku":"BWCS-TPY510SL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391989022810,"sku":"BWCS-TPY510SL-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TPY510SL-1.webp?v=1779142786","url":"https:\/\/batteryweb.com\/products\/tp-link-neffos-y5-replacement-battery-385v-2050mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}