{"product_id":"trimble-s3-replacement-battery-111v-6800mah-li-ion","title":"Trimble S3 Survey Total Station Replacement Battery 11.1V 6800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eTrimble S3 \/ S5 \/ S6 \/ S7 Total Station — 11.1V Li-ion Replacement Battery (79400 \/ 99511-30)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 11.1V, 6800mAh lithium-ion replacement battery for Trimble total stations, including the S3, S5, S6, and S7 series. It matches OEM part numbers 79400 and 99511-30. The battery slots into the instrument's battery bay and connects to the onboard power management system that controls field operation.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eS3 through S7 shared power platform:\u003c\/strong\u003e\n    These total station models run on the same 11.1V three-cell architecture and use the same battery bay connector and BMS handshake protocol. One pack covers all four instrument variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through servo motor initialisation, EDM prism lock sequences, and sustained angle-logging draws. The BMS held stable across all load transitions and did not trigger a protection cutoff during motor-start current spikes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration before field deployment:\u003c\/strong\u003e\n    After installing a new pack, run a full calibration cycle through the instrument's onboard menu before heading to site. The S3 maps battery state during that routine — skip it and the low-battery warning will fire early on your first measurement session, even with a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff during EDM or servo initialisation on the S3\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the S3 fires its EDM module or initialises the servo drive, current draw spikes sharply for 200–400 milliseconds. A battery with aged or unbalanced cells can't sustain that spike without voltage sagging below the BMS protection threshold. The BMS interprets the sag as a fault and shuts the pack down mid-sequence. This pack's cells are balanced at the factory and the BMS threshold is tuned to allow motor-start transients without tripping.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eS3 powers on but shuts off during Bluetooth or USB data transfer to PC\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eData transfer adds a secondary load on top of the active instrument draw — the radio or USB controller pulls current at the same time the processor is reading flash memory. On a low-capacity or partially discharged pack, the combined draw pushes instantaneous current above what the BMS allows. The instrument cuts power to protect the cells, and the transfer fails. Charge the pack to above 12.2V before initiating any transfer session to keep headroom above the BMS cutoff floor.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360732184666,"sku":"BWCS-TRS800XL-1","price":91.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360732217434,"sku":"BWCS-TRS800XL-2","price":107.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360732250202,"sku":"BWCS-TRS800XL-3","price":118.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TRS800XL-1.webp?v=1778616232","url":"https:\/\/batteryweb.com\/products\/trimble-s3-replacement-battery-111v-6800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}