{"product_id":"uniden-ana9310-replacement-battery-36v-700mah-ni-mh","title":"Uniden ANA9310 BT-930 Replacement Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eUniden ANA9310 \/ ANA9320 — 3.6V Ni-MH Replacement Battery (BT-930)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThe BT-930 is a 3.6V 700mAh Ni-MH battery pack that fits the Uniden ANA9310 and ANA9320 cordless handsets. It slots into the handset battery compartment and restores talk time and standby function when the original cell has degraded. Dimensions are 45.20 × 31.16 × 10.50mm — measure your existing pack if you are unsure.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eANA9310 and ANA9320 compatibility:\u003c\/strong\u003e\n    Both models run the same 3.6V three-cell Ni-MH pack with identical connector orientation and footprint. One battery number covers both handsets because the voltage rail and BMS handshake are shared across that generation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the ANA9310 platform. The base station accepted the charge cycle without error and the BMS held within the 3.6V nominal rail throughout.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells arrive partially discharged from storage and need one slow full charge to reach rated capacity — skipping this step is the most common reason buyers report short talk time on a new pack.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells do not reach full capacity on the first charge cycle. Most packs need three to five full charge-and-use cycles before hitting rated capacity. If talk time is noticeably short after the first cycle, run the handset down until it beeps low, then return it to the base for a full charge. By cycle four or five, capacity stabilises at or near the 700mAh rating.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no-charge light or error after inserting new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Ni-MH pack coming out of storage can sit below the voltage threshold the base station expects before it begins a charge cycle. The base interprets a very flat pack as a fault rather than an empty battery. Remove the handset, wait 10 seconds, and reseat it firmly — full contact on the charge pins is required. If the error persists, a short manual charge from a standalone Ni-MH charger at 3.6V will bring the pack up to a voltage the base will accept.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339948294234,"sku":"BWCS-BT930CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339948327002,"sku":"BWCS-BT930CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339948359770,"sku":"BWCS-BT930CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BT930CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/uniden-ana9310-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}