{"product_id":"uniden-dect-2060-replacement-battery-24v-700mah-ni-mh","title":"Uniden DECT 2060 Replacement Battery 2.4V 700mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eUniden DECT 2060 \/ DECT 2080 Series — 2.4V Ni-MH Replacement Battery (BBTG0645001)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 700mAh Ni-MH replacement battery for the Uniden DECT 2060 cordless phone handset and compatible models. It replaces OEM part numbers BBTG0645001, BT-1016, BT-1019, BT-1021, and BBTG0734001. It fits the DECT 2060, DECT 2080, DCX200, DCX200-SLV, and over 100 additional Uniden handset models.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDECT 2060 \/ 2080 and DCX200 series compatibility:\u003c\/strong\u003e\n    These handsets share the same 2.4V two-cell Ni-MH battery bay, connector pin layout, and BMS handshake threshold. One battery part number covers the full range because the base station charges to the same voltage ceiling across all models in this group.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through the Uniden base charging circuit. The BMS accepted charge from storage voltage without triggering an error light, and the cell pair balanced correctly across three full discharge-charge cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge after install:\u003c\/strong\u003e\n    Place the handset in the base immediately after installing the battery and leave it for a full 16 hours before first use. Ni-MH cells shipped in a partially discharged state need a slow, complete first charge to reach rated capacity — skipping this shortens usable talk time from the first day.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNew Ni-MH cells don't hit rated capacity on the first cycle. The electrodes need three to five full charge-discharge cycles before the chemistry stabilises at 700mAh. If talk time feels short immediately after install, run the handset until the low-battery alert sounds, then return it to the base for a full charge. Repeat this process over the first week of use and capacity will reach rated levels.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no-charge or error light with new pack installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eUniden base stations check incoming battery voltage before enabling the charge circuit. A pack that has self-discharged during storage can arrive below the base acceptance threshold — typically under 2.0V — causing an error light instead of a charge indicator. Remove the handset, wait 30 seconds, and re-seat it firmly in the base. If the error persists, check that the handset contacts are clean and making full contact with the base charging pins.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340046532698,"sku":"BWCS-UT2060CL-1","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340046565466,"sku":"BWCS-UT2060CL-2","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340046598234,"sku":"BWCS-UT2060CL-3","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-UT2060CL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/uniden-dect-2060-replacement-battery-24v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}