{"product_id":"unistrong-p8ii-e-replacement-battery-38v-5200mah-li-ion","title":"UniStrong P8II E GNSS Replacement Battery 3.8V 5200mAh BA5200L","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eUniStrong P8II E — 3.8V Li-ion Replacement Battery (BA5200L)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 5200mAh (19.76Wh) Li-ion replacement battery for the UniStrong P8II E GNSS receiver. It fits directly into the P8II E battery bay and works with the instrument's onboard BMS communication. Carry a second pack and you keep survey sessions running without returning to base to recharge.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eP8II E GNSS receiver fit:\u003c\/strong\u003e\n    The P8II E runs a single-cell 3.8V architecture with a specific connector pinout and BMS handshake. This pack matches that voltage rail and pin configuration so the instrument recognises the battery and reports state correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the pack through charge and discharge cycles while monitoring BMS handshake signals. The protection circuit engaged correctly at both the low-voltage cutoff threshold and during simulated GNSS module initialisation spikes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eField calibration before first deployment:\u003c\/strong\u003e\n    After fitting this pack, run a full calibration cycle through the P8II E instrument menu before heading to site. The receiver maps battery state during that routine — skip it and the low-battery warning triggers early during your first logging session, even with a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff during GNSS module initialisation on the P8II E\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the P8II E powers up, the GNSS module draws a short current spike as it initialises the RF front end and acquires satellite lock. On a degraded or deeply discharged pack, this spike can push the instantaneous current demand past the BMS protection threshold, tripping the cutoff before the instrument fully boots. The pack shuts the output before the receiver reaches the home screen, which looks like a dead battery even if the charge indicator showed capacity. A fresh, fully charged pack handles the initialisation spike without tripping; charge to 100% before attempting cold boot.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eP8II E not recognising pack after months in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge over time, and if the pack drops below roughly 2.5V per cell during a long storage period, the BMS enters a sleep state and blocks output entirely — the receiver sees no battery at all. Plugging the depleted pack into the charger may show no response for the first several minutes while the charger attempts a low-current recovery pulse. Leave it on the charger for at least 30 minutes without interrupting the connection; most BMS circuits will re-initialise once the cell voltage climbs back above the 2.8V wake threshold. If the charger LED does not change state after 45 minutes, the cells have dropped below recovery voltage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360492388442,"sku":"BWCS-USP800SL-1","price":65.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360492421210,"sku":"BWCS-USP800SL-2","price":77.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360492453978,"sku":"BWCS-USP800SL-3","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-USP800SL-1.webp?v=1778615901","url":"https:\/\/batteryweb.com\/products\/unistrong-p8ii-e-replacement-battery-38v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}