{"product_id":"unitech-ms910-replacement-battery-37v-380mah-li-polymer","title":"Unitech MS910 Barcode Scanner Replacement Battery 3.7V 380mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eUnitech MS910 Series — 3.7V Li-Polymer Replacement Battery (1414786)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 380mAh Li-Polymer cell replaces the factory battery in the Unitech MS910 compact barcode scanner. It fits the MS910, MS910-CUBB00-SG, MS910-CUBB00-TG, and MS912, among other variants in the series. OEM part numbers 1414786, 1615058, and 682030R all cross to this pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMS910 series compatibility:\u003c\/strong\u003e\n    These models share the same 3.7V power rail, physical footprint (32.00 × 20.30 × 7.00mm), and BMS handshake protocol — the replacement cell slots in and the scanner's charge controller recognises it without reconfiguration.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated scan-trigger events and wireless polling intervals. The BMS held cutoff voltage cleanly at the low-end threshold and accepted charge from a standard MS910 cradle without fault codes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation:\u003c\/strong\u003e\n    After installing this pack, seat the scanner in its cradle and run a full charge cycle before your first pick-and-pack shift. Scan-trigger inrush is highest when the cell is near minimum voltage — a fully charged cell prevents false BMS trips on the first burst of the day.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA charging error on a new Li-Polymer pack almost always comes down to contact resistance at the dock, not a fault in the cell itself. Debris or oxidation on the cradle's gold contacts raises resistance enough that the dock's charge controller sees an out-of-range voltage and flags an error. Wipe the contacts on both the pack and the cradle with a dry cloth, reseat the scanner firmly, and check that the indicator light cycles to solid amber within 30 seconds. If the error persists, measure contact voltage at the cradle pins — you should read between 4.1V and 4.2V with no load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner loses wireless connection during a rapid scan burst\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDuring a fast scan burst, the imager and the wireless radio draw current simultaneously — in the MS910's compact housing there is very little headroom between peak draw and the BMS trip threshold. A degraded or deeply discharged cell cannot sustain both loads at once, so the radio drops first while the scanner still appears powered. Installing a fresh, fully charged pack resolves this in most cases because resting cell voltage stays above 3.6V through the combined inrush spike. If dropouts continue after a full charge, check that the wireless polling interval in your host software is not set below 100ms — tighter polling increases sustained current draw and compounds the problem.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324793618522,"sku":"BWCS-UMS910BL-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324793651290,"sku":"BWCS-UMS910BL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324793684058,"sku":"BWCS-UMS910BL-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-UMS910BL-1.webp?v=1778123184","url":"https:\/\/batteryweb.com\/products\/unitech-ms910-replacement-battery-37v-380mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}