{"product_id":"utec-replacement-battery-37v-1050mah-li-ion","title":"UTEC V171 Smartphone Replacement Battery 3.7V 1050mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eUTEC V171 \/ V181 \/ V201 \/ V566 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1050mAh (3.89Wh) Li-ion cell replaces the original battery in UTEC smartphones carrying OEM part numbers V171, V181, V201, or V566. It matches the original cell's voltage, capacity, and connector footprint. Dimensions are 53.00 × 33.90 × 5.60mm — verify against your existing cell before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV171 \/ V181 \/ V201 \/ V566 compatibility:\u003c\/strong\u003e\n    These four part numbers share the same physical cell format, voltage rail, and connector pinout. Any UTEC handset originally equipped with one of these OEM numbers accepts this replacement without modifications to the connector or housing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge, discharge, and a modem-load stress pass. The BMS held the charge termination voltage correctly and did not trip under the simulated screen-plus-data load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle fast charge protocol:\u003c\/strong\u003e\n    On first use after installation, disable fast charging for one complete discharge-charge cycle. This lets the phone's fuel gauge IC recalibrate against the new cell's discharge curve before high-current fast charging pushes current into an uncalibrated cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on a freshly installed cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new cell has a slightly different voltage-versus-capacity curve than the worn cell the fuel gauge IC was trained on. When the phone draws a spike of current — modem handoff, screen brightness jump — the cell voltage dips below the shutdown threshold even though the gauge still reads 20–30%. The phone cuts power to protect the cell. One full discharge-to-shutdown followed by an uninterrupted charge to 100% retrains the coulomb counter against the new curve. After that cycle, the shutdowns stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone not powering on after the battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge in storage. If the cell voltage drops below roughly 2.5V, the BMS locks out to prevent damage, and the phone will not respond to a power button press or a normal charger plug-in. Connect the phone to a wall adapter — not a PC USB port — and leave it undisturbed for 15–20 minutes. The charge IC trickle-feeds current at a low rate to bring the cell back above the BMS re-enable threshold, after which normal charging resumes. If the phone still does not respond after 30 minutes on the wall adapter, check that the connector is fully seated.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405112770650,"sku":"BWCS-HFC250SL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405112803418,"sku":"BWCS-HFC250SL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405112836186,"sku":"BWCS-HFC250SL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HFC250SL-1.webp?v=1779369992","url":"https:\/\/batteryweb.com\/products\/utec-replacement-battery-37v-1050mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}