{"product_id":"v-tech-ls6005-replacement-battery-24v-300mah-ni-mh","title":"VTech LS6005 Replacement Battery BT183642 2.4V 300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eV Tech LS6005 \/ LS6191 \/ LS6195 — 2.4V Ni-MH Replacement Battery (BT183642)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 300mAh Ni-MH rechargeable battery for the V Tech LS6005, LS6191, and LS6195 cordless phone handsets. It replaces OEM part numbers BT183642 and BT283642. Fit it when the original pack no longer holds a charge through a normal call.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLS6005 \/ LS6191 \/ LS6195 platform fit:\u003c\/strong\u003e\n    These three handset models share the same 2.4V two-cell Ni-MH pack format, connector pitch, and physical envelope — 29.60 × 20.93 × 10.63 mm. One replacement battery covers all three.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the bench. The Ni-MH cells accepted a full charge without thermal runaway, and voltage held steady above the handset's low-battery cutoff threshold across multiple cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base cradle and leave it for a full 16 hours before making a call. Ni-MH cells shipped from storage have partial charge — skipping the slow first charge leaves the pack well below rated 300mAh capacity.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA freshly installed Ni-MH pack arriving from storage can sit below 2.0V total cell voltage. Some V Tech base stations read that as a fault and refuse to begin the charge cycle. The fix is to leave the handset seated in the base undisturbed — most units will begin a trickle recovery charge within 30 minutes once the base detects even a small voltage rise. If the error light persists past one hour, remove the handset, wait 60 seconds, and re-seat it to trigger a fresh detection cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange dropping mid-call after fitting a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe LS-series DECT transmitter draws a current spike each time it handshakes with the base. If the Ni-MH cells have not completed their first full conditioning charge, internal resistance is high enough that voltage sags under that RF load — the handset steps down transmit power to compensate and range shrinks. This is not a fault with the battery or the phone. Complete three full charge-and-use cycles and internal resistance will drop to spec. Check open-circuit voltage after the third cycle — it should read at or above 2.4V off the charger.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339898781786,"sku":"BWCS-VT6191CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339898814554,"sku":"BWCS-VT6191CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339898847322,"sku":"BWCS-VT6191CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VT6191CL-1.webp?v=1778366946","url":"https:\/\/batteryweb.com\/products\/v-tech-ls6005-replacement-battery-24v-300mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}