{"product_id":"valor-vl110-replacement-battery-37v-3400mah-li-ion","title":"Valor VL110 Replacement Battery V3M2 3.7V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eValor VL110 — 3.7V Li-ion Replacement Battery (V3M2)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThe V3M2 is a 3.7V, 3400mAh Li-ion battery for the Valor VL110 portable payment terminal. It slots into the VL110's battery bay and restores the power capacity lost when the original cell degrades. Voltage and connector match the OEM unit exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVL110 platform fit:\u003c\/strong\u003e\n    The VL110 uses a single-cell 3.7V Li-ion pack with a BMS that validates cell chemistry and voltage on boot. This replacement uses the same nominal voltage and BMS handshake profile, so the terminal accepts it without throwing a battery fault on startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge-discharge runs under a combined display, wireless, and print load. The BMS held overcurrent protection across motor-start spikes from the receipt printer without nuisance tripping.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-deploy calibration:\u003c\/strong\u003e\n    After installation, run one complete transaction — including a printed receipt — before putting the terminal into a live environment. The VL110 maps battery capacity during normal operation, and the charge indicator will not read accurately until the terminal completes at least one full power cycle under real load.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal rebooting mid-transaction after battery swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe VL110's receipt printer draws a short high-current burst when it feeds paper. On a new cell, the BMS may interpret that spike as an overcurrent event and cut output before the cell has completed its first full charge cycle. This is a BMS calibration issue, not a faulty battery. Charge the terminal to 100%, complete two or three full transaction-plus-print cycles, and the BMS will adjust its overcurrent threshold to the actual load profile of this device.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eVL110 not powering on after sitting unused in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge at roughly 2–3% per month. A VL110 left in a drawer for several months can drop the cell below 2.5V — the threshold where most BMS circuits lock output to prevent cell damage. The terminal will show nothing on screen even when placed on charge. Connect the terminal to its OEM charger and leave it untouched for 90 minutes; most BMS units enter a trickle pre-charge mode that slowly recovers the cell to the 3.0V level needed to resume normal charging. If voltage does not recover past 3.0V after two hours on charge, the cell is below recoverable threshold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415930339418,"sku":"BWCS-CTA320XL-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415930372186,"sku":"BWCS-CTA320XL-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415930404954,"sku":"BWCS-CTA320XL-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CTA320XL-1.webp?v=1779758085","url":"https:\/\/batteryweb.com\/products\/valor-vl110-replacement-battery-37v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}