{"product_id":"veho-muvi-k1-replacement-battery-37v-1500mah-li-ion","title":"Veho MUVI K1 Compatible Battery 3.7V 1500mAh VCC-A034-SB","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVeho MUVI K1 \/ K2 Series — 3.7V Li-ion Replacement Battery (VCC-A034-SB)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 1500mAh Li-ion battery for the Veho MUVI K1 and K2 action cameras, including VCC-006-K1 and VCC-006-K2NPNG variants. It replaces OEM part VCC-A034-SB and fits directly into the compact camera body. Capacity figures are taken from the product data: 1500mAh \/ 5.55Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eK1 and K2 platform fit:\u003c\/strong\u003e\n    Both the K1 and K2 share the same cell format, connector pinout, and voltage rail at 3.7V nominal. The BMS in each body uses the same charge-termination handshake, so one cell covers the full model range listed above.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on a K2 body. The BMS accepted the cell without fault codes, and charge termination triggered correctly at full capacity. Voltage held steady through moderate continuous-record loads.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge protocol for MUVI bodies:\u003c\/strong\u003e\n    On first install, run one complete charge cycle through the camera body or OEM charger before shooting. MUVI bodies map the battery-remaining indicator against a known discharge curve — skipping this step can cause the indicator to read inaccurately from the first session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the MUVI K1 shows a dead battery icon on a partially charged replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe K1 body stores a discharge curve from the previous cell and uses it to estimate remaining charge. When a new cell goes in, the camera's indicator maps against that old curve until a full cycle resets it. The result is a low or empty battery icon even when the cell is at 3.9V or above. One full charge cycle — from flat to termination inside the camera body — re-calibrates the indicator and clears the false reading.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically during recording on the MUVI K2\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe K2's fuel gauge samples voltage at fixed intervals and converts it to a percentage using a lookup table tuned to the OEM cell's discharge curve. A replacement cell with a slightly different mid-discharge voltage profile will hit those voltage thresholds at different points, causing the percentage to jump or stall. This does not indicate a faulty cell — it is a calibration mismatch. After two to three full charge and discharge cycles in the camera body, the readings stabilise as the BMS updates its reference points.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333677580378,"sku":"BWCS-RBS700MC-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333677613146,"sku":"BWCS-RBS700MC-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333677645914,"sku":"BWCS-RBS700MC-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RBS700MC-1.webp?v=1778213032","url":"https:\/\/batteryweb.com\/products\/veho-muvi-k1-replacement-battery-37v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}