{"product_id":"veins-accuvein-av500-illuminator-replacement-battery-37v-2600mah-li-ion","title":"Veins Accuvein AV500 Compatible Battery 3.7V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVeins Accuvein AV500 Illuminator — 3.7V Li-ion Replacement Battery (110-00003)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 2600mAh Li-ion battery replaces the internal cell in the Accuvein AV500 Illuminator. The AV500 is a handheld near-infrared vein visualization device used clinically for venipuncture and IV placement. It fits OEM part numbers 110-00003, 120074-O, ACCUAVBA500, and BA500.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAV500 Illuminator compatibility:\u003c\/strong\u003e\n    The AV500 uses a single-cell 3.7V Li-ion pack with a BMS that handshakes with the device's charge IC at startup. This replacement cell matches the OEM voltage rail and connector pinout, so the charge circuit recognises it without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through the AV500's power-on sequence and monitored BMS communication. The charge IC accepted the cell on first insertion, and the BMS reported state-of-charge correctly after one full charge cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap startup protocol:\u003c\/strong\u003e\n    After installing this battery, let the AV500 complete its full power-on self-test without interruption. The device runs a BMS verification routine at boot — cutting power during this sequence triggers a false battery fault that sticks until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the AV500 charge indicator stalls below 100% on a new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe AV500's charge IC applies a conservative current limit when it first encounters a cell it hasn't profiled. On a new Li-ion cell, the IC may terminate the charge cycle early because the internal resistance reading doesn't yet match the OEM baseline. This isn't a fault — it resolves after one complete charge-discharge cycle. After that first cycle, the IC recalibrates its termination threshold and the indicator reaches 100% normally.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDevice not completing boot sequence after cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If this battery's resting voltage dropped below approximately 2.5V before installation, the AV500's BMS may block startup entirely — it treats sub-threshold voltage as a damaged cell to protect the device's sensitive optical components. Connect the device to its charger for at least 30 minutes before attempting to power on. This allows the charge IC to apply a pre-charge trickle that brings the cell above the BMS recovery threshold, typically 2.8–3.0V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381371535450,"sku":"BWCS-VAA500MD-1","price":56.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381371568218,"sku":"BWCS-VAA500MD-2","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381371600986,"sku":"BWCS-VAA500MD-3","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VAA500MD_1.webp?v=1778900449","url":"https:\/\/batteryweb.com\/products\/veins-accuvein-av500-illuminator-replacement-battery-37v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}