{"product_id":"verge-v58cid-replacement-battery-36v-700mah-ni-mh","title":"Verge V58CID Replacement Battery 3.6V 700mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVerge V58CID \/ V58HS \/ V58ITA — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V 700mAh Ni-MH replacement battery for the Verge V58CID, V58HS, and V58ITA cordless handsets. It restores talk time and standby capacity when the original cell no longer holds a useful charge. Dimensions are 45.60 × 31.30 × 10.60mm — confirm these match your existing pack before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV58 series handset fit:\u003c\/strong\u003e\n    The V58CID, V58HS, and V58ITA all run the same 3.6V single-cell NiMH pack on a shared voltage rail with identical connector geometry. One battery covers all three models.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the V58CID platform. The cell accepted a full charge from the base station without triggering a charging fault, and voltage held stable under RF transmit load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base for a full 16-hour uninterrupted charge before first use. NiMH cells shipped in storage discharge need a slow initial charge to reach rated capacity — skipping this step leaves you with noticeably shorter talk time from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells do not deliver rated capacity on the first cycle out of the box. Storage discharge leaves the cell partially passivated, and it takes three to five full charge-and-use cycles before the chemistry reaches full capacity. Do not judge the battery on the first day. Run the handset down to low battery, return it to the base for a full charge, and repeat — by cycle four or five, talk time should be at or near rated output.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge or error light after swapping the battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA NiMH pack that has sat in storage can drop below the voltage threshold the base station expects before it initiates a charge cycle. Some Verge base stations will show a fault light or simply not register the handset as charging. Remove the handset, wait 10 seconds, and reseat it firmly — the base needs a clean contact to sense the pack. If the fault persists, check that the contacts on both the handset and cradle are clean and making full metal-to-metal contact; oxidised contacts block the low-current trickle needed to bring a depleted NiMH cell back up to the charge acceptance threshold of around 1.0V per cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339963531354,"sku":"BWCS-CPJ464CL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339963564122,"sku":"BWCS-CPJ464CL-2","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339963596890,"sku":"BWCS-CPJ464CL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CPJ464CL-1.webp?v=1777949695","url":"https:\/\/batteryweb.com\/products\/verge-v58cid-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}