{"product_id":"verifone-e285-replacement-battery-38v-1750mah-li-ion","title":"VeriFone E285 POS Terminal Replacement Battery 3.8V 1750mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVeriFone E285 — 3.8V Li-ion Replacement Battery (BPK087-600)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 1750mAh Li-ion battery for the VeriFone E285 and IPAY E285 payment terminals. It replaces OEM part numbers BPK087-600, BPK087-600-01-A, BPK087-600-01-B, and BPK087-600-01-C. If your terminal is shutting down mid-transaction or refusing to hold a charge, this is the direct swap.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eE285 and IPAY E285 fit:\u003c\/strong\u003e\n    Both variants run the same 3.8V battery bay, BMS connector pinout, and charge IC handshake. The -01-A, -01-B, and -01-C suffixes are VeriFone hardware revision codes — the cell spec and connector are unchanged across all three.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through charge-discharge on an E285 unit and confirmed the BMS accepted the cell without fault codes. The charge IC completed top-off mode and the terminal read battery status correctly across multiple power cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst deployment tip for the E285:\u003c\/strong\u003e\n    After installing this battery, run one complete transaction — tap or swipe through to receipt — before deploying in a live checkout environment. The terminal maps cell capacity during normal operation and needs at least one full power cycle to calibrate the charge indicator correctly.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the E285 reboots mid-transaction after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe E285 draws a combined load from its display, wireless radio, and receipt printer simultaneously during a transaction. On a new or partially discharged cell, that combined spike can push current demand past the BMS overcurrent threshold, triggering a protective cutoff that looks like a random reboot. The BMS on this cell is set to the E285's rated draw envelope. If reboots continue after the first few transactions, check that the terminal firmware is current — older builds have an aggressive low-voltage cutoff that trips too early on cells below 3.6V.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal stuck at 99% charge and not dropping — what that means\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Li-ion cell arrives at a partial state of charge for transport safety. When first connected to a charger, the E285's charge IC enters top-off mode and holds the display at 99% while it brings the cell to full capacity at a low trickle rate. This is normal behaviour — it is not a fault with the battery or the terminal. The indicator will move to 100% and then begin reporting normally once the charge IC exits top-off mode, typically after the first complete charge cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415932698714,"sku":"BWCS-VFE285BL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415932731482,"sku":"BWCS-VFE285BL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415932764250,"sku":"BWCS-VFE285BL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VFE285BL-1.webp?v=1779758145","url":"https:\/\/batteryweb.com\/products\/verifone-e285-replacement-battery-38v-1750mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}