{"product_id":"vibo-k520-replacement-battery-37v-750mah-li-ion","title":"VIBO K520 Replacement Battery 3.7V 750mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVIBO K520 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 750mAh (2.78Wh) Li-ion cell for the VIBO K520 smartphone. It fits the original battery slot and matches the K520's connector and voltage rail. If your K520 shuts down unexpectedly, won't hold a charge, or won't power on at all, this cell addresses the cause.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eK520 fit confirmation:\u003c\/strong\u003e\n    The K520 uses a single Li-ion cell at 3.7V nominal. This replacement matches that voltage rail, the physical footprint (53.00 × 33.90 × 5.70mm), and the connector orientation — no modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through a full discharge and charge sequence, monitored BMS cutoff at the low-voltage threshold, and confirmed charge acceptance up to the 4.2V cell ceiling without thermal anomaly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    Disable fast charging for the first complete discharge-charge cycle after fitting this cell. The K520's fuel gauge IC was calibrated to the old cell's discharge curve. One full cycle at standard current lets it recalibrate against the new cell before high-current charging begins.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the K520 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe K520's fuel gauge IC tracks charge state using a coulomb counter trained on the original cell's impedance and discharge curve. Swap in a new cell and the counter is still running the old model — so the percentage readout drifts from reality. The fix is one full discharge-charge cycle at standard current, which gives the IC enough data to rebuild its internal model. After that cycle, percentage readout stabilises and matches actual cell state.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the K520 after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the modem or screen pulls a short high-current burst and the cell voltage drops below the BMS cutoff threshold — even though the fuel gauge still shows charge remaining. It is a voltage sag problem, not a capacity problem. It is most common in the first few cycles before the fuel gauge IC has recalibrated. Run two full discharge-charge cycles and the shutdowns typically stop; if they persist past cycle three, check that the cell connector is fully seated and the contact pins are clean.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409502863450,"sku":"BWCS-NK5CML-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409502896218,"sku":"BWCS-NK5CML-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409502928986,"sku":"BWCS-NK5CML-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NK5CML-1.webp?v=1779579815","url":"https:\/\/batteryweb.com\/products\/vibo-k520-replacement-battery-37v-750mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}