{"product_id":"video-devices-sound-devices-633-mixer-replacement-battery-74v-7800mah-li-ion","title":"Video Devices XL-B3 Replacement Battery 7.4V 7800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVideo Devices Sound Devices 633 \/ PIX 240i \/ PIX-E — 7.4V Li-ion Replacement Battery (XL-B3)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 7800mAh (57.72Wh) lithium-ion cell built to the XL-B3 specification. It fits the Sound Devices 633 field mixer, PIX 240i, PIX-E, and compatible 4K recording monitors. If your current XL-B3 is no longer holding charge through a full location recording session, this is the direct replacement.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e633, PIX 240i, PIX-E, and 4K monitor compatibility:\u003c\/strong\u003e\n    These units share the same 7.4V battery rail, connector footprint, and BMS handshake protocol. One cell spec covers the full range without modification or adapters.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on a 633 body. The BMS accepted the cell, reported state-of-charge correctly, and thermal regulation stayed within normal operating limits under sustained load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eField recorder power sequencing:\u003c\/strong\u003e\n    The 633 draws a brief inrush current at power-on as it initialises preamps and phantom power circuits. Do not hot-swap this cell while phantom power is active — power the unit down fully before exchanging batteries in the field to avoid a BMS protection trip on the new cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the 633 cuts phantom power mid-session on a low battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Sound Devices 633 supplies 48V phantom power to condenser microphones through an internal DC-DC boost converter. That converter draws a disproportionately large current from the 7.4V cell when the cell voltage starts to sag. The BMS reads this current spike as an over-discharge event and trips the protection circuit before the battery indicator reaches zero. The result is an abrupt phantom power drop — and a dead mic — while the display still shows residual charge. Replacing an aged XL-B3 with a fresh cell at full 7.4V nominal restores the headroom the boost converter needs to run cleanly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage on the 633 display jumping or reading incorrectly after install\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe 633 maps its battery percentage indicator against a discharge voltage curve calibrated to the original XL-B3 cell chemistry. A new cell has a slightly flatter discharge curve early in its life, so the unit's fuel gauge can read erratically — jumping from 80% to 50% without warning — until the BMS has logged one or two full charge-discharge cycles. Run the new cell from 100% down to automatic shutdown, then charge fully in the 633 body. After two cycles the percentage readout stabilises. If it still jumps after three cycles, check that the cell resting voltage is at or above 8.2V fully charged.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333597462618,"sku":"BWCS-NF960MU-1","price":105.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333597495386,"sku":"BWCS-NF960MU-2","price":121.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333597528154,"sku":"BWCS-NF960MU-3","price":131.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NF960MU-1.webp?v=1778212994","url":"https:\/\/batteryweb.com\/products\/video-devices-sound-devices-633-mixer-replacement-battery-74v-7800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}