{"product_id":"viomi-alpha-2-pro-replacement-battery-144v-6700mah-li-ion","title":"Viomi Alpha 2 Pro 14.4V Replacement Battery 6700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eViomi Alpha 2 Pro \/ VXVC15-JC — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V Li-ion battery pack delivers 6700mAh (96.48Wh) to the Viomi Alpha 2 Pro and Alpha 2 Pro Plus cordless stick vacuums, including VXVC15-JC and VXVC16-JC models. It slots into the same battery housing as the original and connects to the same BMS handshake the vacuum's motor controller expects. Capacity is sourced from cell-level data — not rounded figures.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAlpha 2 Pro and Pro Plus compatibility:\u003c\/strong\u003e\n    The VXVC15-JC and VXVC16-JC share the same 14.4V battery rail, connector pitch, and BMS communication protocol. One cell configuration covers both variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and load cycles on the Alpha 2 Pro motor assembly. The BMS held steady under sustained suction draw and triggered overcurrent protection correctly when airflow was deliberately restricted.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging behaviour on this vacuum:\u003c\/strong\u003e\n    The Alpha 2 Pro's dock does not cut trickle charge once the pack is full. Leaving the vacuum on the dock permanently accelerates capacity fade. Charge to full, then remove it from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCordless vacuum losing suction before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the battery can sustain at its present state of charge. A partially blocked filter forces the motor to pull harder, which drops cell voltage faster than the indicator predicts. The BMS reads a low-voltage condition and throttles output before the indicator LED registers it. Clean the filter first — if suction recovers immediately, the battery is not the fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a faulty battery. When the suction path is restricted — blocked brush roll, clogged filter, or carpet fibres packed into the inlet — the motor current spikes past the BMS threshold and the pack shuts output. The few-second recovery window is the BMS resetting after the overcurrent event clears. Clear the blockage, then confirm the pack voltage reads at least 14.0V under load before concluding the cell is degraded.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427987652698,"sku":"BWCS-PCM720VX-1","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427987685466,"sku":"BWCS-PCM720VX-2","price":72.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427987718234,"sku":"BWCS-PCM720VX-3","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PCM720VX-1.webp?v=1779933755","url":"https:\/\/batteryweb.com\/products\/viomi-alpha-2-pro-replacement-battery-144v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}