{"product_id":"viomi-v3-replacement-battery-144v-4500mah-li-ion","title":"Viomi V3 14.4V Replacement Battery 5465V202 4500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eViomi V3 — 14.4V Li-ion Replacement Battery (5465V202)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 4500mAh Li-ion battery pack for the Viomi V3 cordless stick vacuum. It replaces OEM part number 5465V202 and fits the V3 platform directly. Voltage and cell count match the original pack so the vacuum's motor controller sees no difference.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV3 platform fit:\u003c\/strong\u003e\n    The V3 uses a 14.4V nominal rail with a specific BMS handshake for charge acceptance and low-voltage cutoff. This pack runs the same cell configuration and communicates with the V3 charger the same way the factory pack does.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge cycles on the V3 dock and monitored BMS cutoff thresholds. The pack accepted charge without fault codes and the motor controller engaged cleanly at startup under simulated floor load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline on the V3:\u003c\/strong\u003e\n    Do not leave the V3 sitting on the charging dock after the pack reaches full. Continuous trickle charge from the dock is the single fastest way to degrade cell capacity on this vacuum. Charge to full, then remove it from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the V3\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe V3 motor draws more current the moment airflow is restricted — a partially blocked filter or blockage in the brush head forces the motor to work harder, pulling the cell voltage down faster than normal. The battery indicator reads state of charge, not motor load, so it can still show half-full while suction has already dropped noticeably. A degraded or partially charged pack makes this worse because the cells have less headroom before voltage sag hits the motor controller's minimum threshold. Clean the filter and check the brush head for blockage first — if suction recovers immediately, the pack is fine and the restriction was the cause.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eV3 motor cutting out mid-clean then recovering after a few seconds\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When sustained suction restriction forces the motor to draw above the BMS's current limit — typically triggered by a clogged filter or jammed brush roll — the BMS cuts power to protect the cells. After a few seconds the BMS resets and the motor restarts. The fix is not a new battery. Clear the filter, remove any hair or debris wrapped around the brush roll, and the trip threshold won't be reached under normal load. If the cutout continues on a clean, unobstructed vacuum, check that cell voltage at rest reads above 12.0V before concluding the pack is faulty.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427977035866,"sku":"BWCS-XMV300VX-1","price":56.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427977068634,"sku":"BWCS-XMV300VX-2","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427977101402,"sku":"BWCS-XMV300VX-3","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-XMV300VX-1.webp?v=1779933697","url":"https:\/\/batteryweb.com\/products\/viomi-v3-replacement-battery-144v-4500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}