{"product_id":"vistefly-vc-1819a-replacement-battery-252v-2500mah-li-ion","title":"Vistefly VC-1819A Replacement Battery 25.2V 2500mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVistefly VC-1819A — 25.2V Li-ion Replacement Battery (PK-1819-A03)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 25.2V, 2500mAh Li-ion replacement battery for the Vistefly VC-1819A cordless stick vacuum. It slots into the same battery bay as the original PK-1819-A03 pack. Voltage and cell count match the original, so the motor and BMS communicate as expected.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVC-1819A motor voltage rail:\u003c\/strong\u003e\n    The VC-1819A runs a 25.2V nominal rail — that is six Li-ion cells in series. Swapping in a pack at a different cell count would shift the voltage range the motor controller sees and trigger early cutoff. This pack keeps the same six-cell series string, so the discharge curve stays within spec.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated full discharge and charge sequences on the VC-1819A platform. The BMS handled charge termination cleanly, and cell balancing engaged correctly on each cycle without false low-voltage trips.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the VC-1819A:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock continuously. The VC-1819A charger does not switch to a true storage mode — sustained trickle current compresses cell capacity over weeks. Charge to full, then remove the vacuum from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the BMS allows under sustained load — not because the cells are empty. A partially blocked filter forces the motor to work harder, pulling current above the pack's continuous discharge threshold. The BMS responds by throttling output, which reads as suction loss even though the indicator still shows charge remaining. Clean or replace the filter first, then retest suction at full charge.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-use and then recovering after a pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is an overcurrent trip, not a dead battery. When suction is restricted — blocked brush roll, clogged filter, or sealed floor head — the motor stalls briefly and current spikes. The BMS cuts output to protect the cells, then resets once current drops. The cutout-and-recovery cycle will keep repeating until the blockage is cleared. Clear the obstruction, confirm pack voltage reads at or above 22V under load, and retry.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426484453466,"sku":"BWCS-EFH110VX-1","price":101.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426484486234,"sku":"BWCS-EFH110VX-2","price":119.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426484519002,"sku":"BWCS-EFH110VX-3","price":133.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EFH110VX-1.webp?v=1779933418","url":"https:\/\/batteryweb.com\/products\/vistefly-vc-1819a-replacement-battery-252v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}