{"product_id":"vivo-nex-replacement-battery-385v-3900mah-li-polymer","title":"Vivo NEX B-E6 Replacement Battery 3.85V 3900mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVivo NEX \/ NEX S \/ NEX A — 3.85V Li-Polymer Replacement Battery (B-E6)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThe B-E6 is a 3900mAh Li-Polymer cell rated at 3.85V, built to replace the original battery in the Vivo NEX, NEX S, NEX A, and NEX Global Dual SIM. These phones are known for high-refresh displays and processor-intensive workloads that accelerate cell degradation over time. Swap this in when the original cell no longer carries the phone through a full day.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNEX platform compatibility:\u003c\/strong\u003e\n    The NEX, NEX S, NEX A, and Global Dual SIM variants all share the same battery bay dimensions and B-E6 connector pinout. The BMS handshake uses the same voltage rail across the range, so one cell covers all listed models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the B-E6 through charge and load cycles on the NEX platform. The BMS accepted the cell without fault codes, and charge termination triggered correctly at 4.35V across multiple cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After installation, disable fast charging and run one full discharge-to-charge cycle at standard rate. The NEX fuel gauge IC maps its coulomb counter to the new cell's discharge curve during this cycle. Skipping it causes the percentage display to drift until the IC re-anchors its reference points.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Vivo NEX after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff issue, not a capacity defect. Under sustained modem or display load, the cell voltage drops sharply near the bottom of its curve. If the fuel gauge IC is still calibrated to the old cell's curve, it reads 25% remaining when the actual terminal voltage has already fallen below the shutdown threshold. The protection circuit cuts power before the OS can respond. One complete discharge cycle — taken to the automatic cutoff, not manually forced — lets the coulomb counter reset its zero-reference against the new cell. After that cycle, shutdowns at mid-percentage typically stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eUSB fast charging not accepted on the first cycle after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge after fitting a new B-E6, the Vivo NEX charge IC may fall back to standard 5V charging instead of triggering its fast-charge protocol. The charge controller checks cell impedance and state-of-charge before handshaking with the charger. A new cell at low state-of-charge can return an impedance reading that causes the IC to hold back the higher current until it has a stable baseline. Plug in using the original Vivo adapter, allow the first cycle to complete fully at whatever rate the IC permits, and fast charging should resume from the second cycle onward at normal voltage and current.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391946457178,"sku":"BWCS-BYN180SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391946489946,"sku":"BWCS-BYN180SL-2","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391946522714,"sku":"BWCS-BYN180SL-3","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BYN180SL-1.webp?v=1779142719","url":"https:\/\/batteryweb.com\/products\/vivo-nex-replacement-battery-385v-3900mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}