{"product_id":"vivo-s10-replacement-battery-387v-3950mah-li-polymer","title":"Vivo S10 B-R0 Compatible Battery 3.87V 3950mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVivo S10 \/ V2121A — 3.87V Li-Polymer Replacement Battery (B-R0)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.87V, 3950mAh (15.29Wh) Li-Polymer battery for the Vivo S10 and V2121A smartphones. It replaces OEM part number B-R0 and fits the original battery bay without modification. Capacity figure comes from the product data — not estimated from third-party sources.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eS10 and V2121A fit:\u003c\/strong\u003e\n    Both model numbers refer to the same hardware platform — the V2121A is the regional variant designation. They share the same battery bay dimensions, connector pinout, and BMS handshake protocol, so one cell covers both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on an S10 unit. The BMS accepted the cell without a fault code, and the charge IC stepped through trickle, constant-current, and constant-voltage phases as expected on a fresh cell.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After fitting this cell, disable fast charging and run one full discharge-charge cycle at standard current. The fuel gauge IC on the S10 is calibrated to the old cell's discharge curve — one slow cycle lets it remap against the new cell before high-current fast charging begins pushing current into an uncalibrated state.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the S10 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe S10 uses a coulomb counter inside the fuel gauge IC to estimate remaining charge. When the original cell degrades, the phone learns a new, shortened discharge curve. Swapping in a fresh 3950mAh cell does not automatically reset that learned curve — the IC still references the old data. The result is percentage readings that jump, plateau, or drop faster than the actual charge level. One complete slow discharge down to shutdown, followed by a full charge, resets the reference and restores accurate reporting.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% remaining on the replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the modem, display, or processor pulls a short burst of high current and the cell voltage drops below the BMS cutoff threshold — even though the reported percentage looks safe. On a new cell that has not been calibrated, the fuel gauge IC underestimates how close the cell is to its low-voltage floor. The fix is the same recalibration cycle: discharge fully to auto-shutdown, charge to 100% without interruption at standard speed, and the IC resets its low-voltage reference point. After that cycle, the phone will shut down correctly at the actual low-voltage floor rather than mid-use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391854248026,"sku":"BWCS-BKV100SL-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391854280794,"sku":"BWCS-BKV100SL-2","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391854313562,"sku":"BWCS-BKV100SL-3","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BKV100SL-1.webp?v=1779142366","url":"https:\/\/batteryweb.com\/products\/vivo-s10-replacement-battery-387v-3950mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}