{"product_id":"vivo-x21-replacement-battery-385v-3200mah-li-polymer","title":"Vivo X21 B-D7 Replacement Battery 3.85V 3200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eVivo X21 Series — 3.85V Li-Polymer Replacement Battery (B-D7)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThe B-D7 is a 3.85V, 3200mAh (12.32Wh) lithium-polymer cell that fits the Vivo X21, X21 UD, X21 UD Dual SIM, and X21 UD Dual SIM TD-LTE. It replaces the original internal battery when capacity has degraded and the phone no longer holds charge through a normal day. Dimensions are 76.88 × 61.60 × 3.82mm — matching the original cell footprint inside the chassis.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eX21 and X21 UD compatibility:\u003c\/strong\u003e\n    All variants in this lineup share the same battery bay geometry, connector pinout, and BMS handshake protocol. A single cell part number covers the standard X21 through the Dual SIM TD-LTE variant without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on X21 hardware. The BMS accepted the charge profile correctly, protection circuits tripped at expected voltage limits, and the connector seated without forced fitment.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after install:\u003c\/strong\u003e\n    On first use after installation, disable fast charging and run one full discharge-charge cycle at standard current. This lets the fuel gauge IC build a fresh discharge curve against the new cell before high-current charging pushes into an uncalibrated state.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Vivo X21 after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Vivo X21's fuel gauge IC stores the old cell's discharge curve in memory. When a new cell goes in, the IC still references that stale curve, so the voltage model and real cell voltage diverge. Under modem transmit load or full-brightness display draw, the cell voltage drops faster than the IC predicts, and the phone cuts out before the percentage reaches zero. One complete discharge down to automatic shutdown followed by a full charge resets the coulomb counter and rebuilds the curve against the new cell. After that cycle, reported percentage tracks actual cell state correctly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eUSB fast charging not activating on the first cycle after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe X21's charge IC handshakes with the battery BMS before stepping up to fast-charge current. On a freshly installed cell, the BMS may not complete that handshake on the first plug-in, so the phone falls back to standard 5V charging. Unplug the cable, wait 10 seconds, and reconnect — this forces the charge IC to re-initiate the handshake sequence. If fast charging still does not activate, complete one standard-current charge cycle first; the BMS initialises fully once the cell reaches a known state above 3.9V per cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43392021495898,"sku":"BWCS-BKX210SL-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43392021528666,"sku":"BWCS-BKX210SL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43392021561434,"sku":"BWCS-BKX210SL-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BKX210SL-1.webp?v=1779142943","url":"https:\/\/batteryweb.com\/products\/vivo-x21-replacement-battery-385v-3200mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}