{"product_id":"xiaomi-mi-play-replacement-battery-385v-2900mah-li-polymer","title":"Xiaomi Mi Play BN39 Replacement Battery 3.85V 2900mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eXiaomi Mi Play — 3.85V Li-Polymer Replacement Battery (BN39)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThe BN39 is a 3.85V, 2900mAh Li-Polymer cell for the Xiaomi Mi Play (M1901F9T, M1901F9E). It replaces the original battery when the cell can no longer hold charge across a full day. Capacity figures are taken from product data — 11.17Wh total energy.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMi Play platform fit:\u003c\/strong\u003e\n    The M1901F9T and M1901F9E share the same battery bay dimensions (73.80 × 62.00 × 3.70mm), connector pinout, and BMS handshake protocol — so a single BN39 cell covers both regional variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the BN39 through charge and discharge cycles on the Mi Play platform. The BMS accepted the cell, charge termination triggered correctly at full voltage, and no thermal events occurred during the high-current phase.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After installation, disable fast charging and run one full discharge down to automatic shutdown, then charge to 100% on standard current. This gives the fuel gauge IC a clean reference curve for the new cell before fast-charge current is applied to an uncalibrated state.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Mi Play after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Mi Play's fuel gauge IC stores a discharge curve from the previous cell. When a new BN39 is installed, the IC still references the old curve, so the voltage it expects at 20–30% no longer matches what the fresh cell delivers under modem and display load. The phone reads a safe charge level but the cell voltage drops below the BMS cutoff threshold the instant current demand spikes. One full discharge-to-shutdown cycle followed by a complete charge forces the coulomb counter to rebuild its reference map against the new cell, which stops the premature cutoff.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMi Play not powering on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells self-discharge during storage. If the BN39 dropped below roughly 2.5V per cell before installation, the BMS enters a lockout state and blocks normal charging to prevent damage to an over-discharged cell. Plug the phone into a charger and leave it for 15–20 minutes without attempting to power it on — most charger ICs trickle current into a locked-out BMS at around 100mA to bring the cell voltage back above the recovery threshold. Once the cell clears approximately 3.0V, the BMS releases and normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43392008945754,"sku":"BWCS-MUP390SL-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43392008978522,"sku":"BWCS-MUP390SL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43392009011290,"sku":"BWCS-MUP390SL-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MUP390SL-1.webp?v=1779142904","url":"https:\/\/batteryweb.com\/products\/xiaomi-mi-play-replacement-battery-385v-2900mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}