{"product_id":"xtool-x100-pad-2-replacement-battery-74v-5000mah-li-polymer","title":"XTOOL X100 Pad 2 Compatible Battery 7.4V 5000mAh PL3769122-2S","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eXTOOL X100 Pad 2 Series — 7.4V Li-Polymer Replacement Battery (PL3769122-2S)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 5000mAh Li-Polymer replacement battery for the XTOOL X100 Pad 2 and X100 Pad 2 Pro automotive diagnostic scanners. It fits both the standard and Auto Key Programmer variants of the X100 Pad 2 line. The OEM part number is PL3769122-2S.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eX100 Pad 2 and Pad 2 Pro compatibility:\u003c\/strong\u003e\n    Both models share the same battery bay dimensions, connector pinout, and BMS handshake protocol. The 125.80 × 66.00 × 9.00mm cell fits without modification, and the BMS negotiates charge and discharge thresholds identically across all four listed variants.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran charge cycles on the X100 Pad 2 platform and confirmed the BMS accepts the cell, completes a full charge cycle without fault flags, and holds steady voltage under the processor and display load typical of active OBD sessions.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eData export before battery removal:\u003c\/strong\u003e\n    Vehicle profiles and saved fault code records on the X100 Pad 2 are held in RAM backed by the main battery. Pull those records to a USB drive or the XTOOL app before removing the old cell — they will not survive a complete power loss during the swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the X100 Pad 2 refuses to boot after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA freshly installed Li-Polymer cell can sit below the X100 Pad 2's minimum boot voltage if it has self-discharged during storage. The scanner's BMS will not attempt to power the main board until cell voltage clears approximately 3.2V per cell, which is 6.4V across the pack. If the unit shows no response at the power button, connect the OEM charger and leave it for 20–30 minutes before pressing power again. Once the BMS detects voltage above the boot threshold, normal startup resumes.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWiFi and Bluetooth dropping mid-diagnostic session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe X100 Pad 2 runs its wireless radios off the same battery rail as the display and processor. When a degraded cell can no longer hold voltage under combined load, the radio stack is the first subsystem the power manager sheds. You will see the connection drop while the battery indicator still reads 20–30%, because the displayed percentage is calculated from a worn discharge curve, not the actual cell voltage. Replacing the cell restores the voltage headroom the radio needs to stay live. After fitting this battery, recalibrate the indicator by running one full charge-to-discharge cycle before relying on the percentage display.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360129941594,"sku":"BWCS-XTX100SL-1","price":41.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360129974362,"sku":"BWCS-XTX100SL-2","price":48.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360130007130,"sku":"BWCS-XTX100SL-3","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-XTX100SL-1.webp?v=1778610920","url":"https:\/\/batteryweb.com\/products\/xtool-x100-pad-2-replacement-battery-74v-5000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}