{"product_id":"yeedi-vac-robot-vacuum-replacement-battery-144v-6400mah-li-ion","title":"Yeedi S10-Li-144-5200 14.4V Replacement Battery 6400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eYeedi Vac \/ Vac 2 \/ Vac 2 Pro \/ Vac Max Robot Vacuum — 14.4V Li-ion Replacement Battery (S10-Li-144-5200)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 6400mAh Li-ion replacement battery for the Yeedi Vac, Vac Max, Vac 2, and Vac 2 Pro robot vacuums. It replaces OEM part number S10-Li-144-5200. Fit this battery when the original cell no longer holds a charge or cleaning cycles have shortened noticeably.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVac series platform compatibility:\u003c\/strong\u003e\n    The Vac, Vac Max, Vac 2, and Vac 2 Pro share the same 14.4V battery bay, connector pin layout, and BMS handshake protocol — one replacement cell covers all four models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the Vac 2 platform. The BMS communicated correctly with the vacuum's main board, reported accurate state-of-charge to the indicator, and held voltage stable under sustained suction load on both hard floor and carpet modes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging practice for the Vac series:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock between cleaning sessions indefinitely. Continuous trickle charging from the dock degrades Li-ion cell capacity faster than normal use. Charge the unit fully after a session, then remove it from the dock until it needs a recharge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA partially blocked filter forces the motor to draw more current than rated to maintain airflow. Under that extra load, the battery voltage sags earlier than the BMS threshold that triggers the low-battery indicator. The vacuum loses suction noticeably while the indicator still shows mid or high charge. Clean or replace the filter first — if suction recovers, the battery was compensating for airflow restriction, not failing.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-cycle then recovering on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a failed motor. When suction is restricted — by a blocked filter, tangled brush roll, or dense carpet pile — sustained current draw exceeds the BMS protection threshold and it disconnects the cell. The vacuum goes silent, then restarts after the BMS resets. Clear the blockage, spin the brush roll by hand to confirm it turns freely, and check that the filter is clean. If the cutout continues after clearing restrictions, measure the resting cell voltage — a degraded cell sagging below 12V under light load needs replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428000890970,"sku":"BWCS-EDT810VX-1","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428000923738,"sku":"BWCS-EDT810VX-2","price":88.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428000956506,"sku":"BWCS-EDT810VX-3","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EDT810VX-1.webp?v=1779933799","url":"https:\/\/batteryweb.com\/products\/yeedi-vac-robot-vacuum-replacement-battery-144v-6400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}