{"product_id":"zaco-a4-replacement-battery-148v-2200mah-li-ion","title":"Zaco A4 Robotic Vacuum Replacement Battery 14.8V 2200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZaco A4 \/ A6 \/ A8 \/ A9 Series — 14.8V Li-ion 2200mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.8V Li-ion replacement battery rated at 2200mAh (32.56Wh) for the Zaco A4, A6, A8, and A9 robotic vacuum cleaners. It replaces the original cell pack when capacity fade prevents the robot from completing a full cleaning cycle. Voltage and connector match the OEM specification for these models.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eA4 \/ A6 \/ A8 \/ A9 platform fit:\u003c\/strong\u003e\n    These models share the same 14.8V battery bay, connector pinout, and BMS handshake protocol. One cell pack covers all four variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the A4's charge and discharge sequence. The BMS communicated correctly with the dock charger, accepted a full charge without error codes, and the protection circuit tripped cleanly at the low-voltage cutoff threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on robotic vacuums:\u003c\/strong\u003e\n    Do not leave the Zaco on its charging dock permanently between uses. Robotic vacuums on continuous dock charge degrade cell capacity significantly faster than units charged only when depleted. Charge to full, then remove from the dock until the next scheduled clean.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the BMS expects — usually because a partially blocked filter increases resistance against the fan. The BMS reads the elevated draw as an abnormal load event and throttles output voltage to protect the cells, even though the indicator still shows charge remaining. Clean the filter first. If suction recovers immediately, the battery is not the cause. If the same drop happens with a clean filter, the old cell pack has lost enough capacity that its internal resistance is causing voltage sag under normal motor load — that is the replacement trigger.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-cycle then restarts on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a software fault. It occurs when sustained restricted airflow — blocked brush roll, clogged filter, or debris jam — forces the motor to pull current past the protection threshold. The BMS disconnects output to prevent cell damage, then resets after a short thermal recovery window. Clear the blockage, check the brush roll for hair wrap, and confirm the filter is seated correctly. If cut-outs continue on a fully cleared machine, verify the pack voltage at rest reads at or above 14.4V before concluding the battery requires replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428061216858,"sku":"BWCS-ECR130VX-1","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428061249626,"sku":"BWCS-ECR130VX-2","price":55.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428061282394,"sku":"BWCS-ECR130VX-3","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ECR130VX-1.webp?v=1779934014","url":"https:\/\/batteryweb.com\/products\/zaco-a4-replacement-battery-148v-2200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}