{"product_id":"zebra-mt2000-replacement-battery-37v-2400mah-li-ion","title":"Zebra MT2000 Replacement Battery 3.7V 2400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZebra MT2070 \/ MT2090 Series — 3.7V Li-ion Replacement Battery (82-108066-1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 2400mAh Li-ion battery for the Zebra MT2000, MT2070, MT2090, and RFD5500 handheld mobile computers. These scanners are used in pick-and-pack, receiving, and retail stock operations where the unit runs through multiple shifts. When the original cell degrades, scan trigger response slows and wireless drops become frequent — this pack restores normal operation.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMT2000 \/ MT2070 \/ MT2090 \/ RFD5500 fit:\u003c\/strong\u003e\n    All four models share the same 3.7V battery bay, connector pinout, and BMS handshake protocol. The MT2070 and MT2090 are variants of the same platform — the cell communicates state-of-charge to the device over the same data line, so the fuel gauge reads correctly on all four.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through scan-burst and wireless-active load profiles on the MT2070. The BMS held stable across inrush from the laser trigger combined with active 802.11 polling, and the cell did not trip the low-voltage cutoff during simulated high-frequency scan sequences.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift prep for pick-and-pack use:\u003c\/strong\u003e\n    After installing, seat the scanner in its cradle and let it complete a full charge cycle before using it on the floor. Scan trigger inrush is highest when the cell is near minimum — a fully charged pack prevents false BMS trips during the first shift's high-demand opening period.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe MT2000-series cradle checks contact resistance before initiating the charge cycle. If the gold contacts on the battery base or the cradle pins have oxidation or debris, the cradle flags a fault and stops charging before current flows. Wipe the battery contacts and cradle pins with a dry cloth, then reseat the pack firmly until it clicks. If the error clears, the contact surface was the problem — not the cell or the cradle electronics.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe MT2070 and MT2090 draw current simultaneously from the scan trigger and the 802.11 radio during rapid barcode capture sequences. A degraded or deeply discharged cell cannot sustain that combined inrush, and the voltage sags enough to drop the radio connection. The BMS does not trip — the radio simply loses its minimum operating voltage for a fraction of a second. Charge the replacement pack fully before the shift and the combined draw stays well within the cell's sustained current rating.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324773859418,"sku":"BWCS-MT207BL-1","price":53.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43324773892186,"sku":"BWCS-MT207BL-2","price":63.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43324773924954,"sku":"BWCS-MT207BL-3","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MT207BL-1.webp?v=1778123184","url":"https:\/\/batteryweb.com\/products\/zebra-mt2000-replacement-battery-37v-2400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}