{"product_id":"zebra-replacement-battery-37v-1350mah-li-ion","title":"Zebra BPK087-201-01-A Compatible Battery 3.7V 1350mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZebra BPK087-201-01-A — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1350mAh Li-ion battery replaces the OEM pack in Zebra portable payment terminals using part number BPK087-201-01-A. It fits the compact terminal form factor and uses the same connector and BMS handshake profile as the original cell. Capacity is 1350mAh (5Wh) — use the product data figure, not third-party listings that round up.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBMS handshake on Zebra payment terminals:\u003c\/strong\u003e\n    Zebra POS terminals run a BMS authentication check at boot. This cell passes that check. The terminal reads state-of-charge and cell health over the battery communication line before allowing the payment stack to load. A mismatched BMS profile causes the terminal to boot-loop or refuse to launch the PCI payment application.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge under a simulated transaction load — display on, wireless active, printer firing. The BMS held within spec under combined draw and did not trip overcurrent during printer motor pulses.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst deployment tip for payment terminals:\u003c\/strong\u003e\n    After installation, complete one full transaction cycle before putting the terminal into live service. The terminal maps battery capacity during normal operation and needs at least one complete power cycle to calibrate the charge indicator correctly.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal not completing PCI boot sequence after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eZebra payment terminals run a PCI security boot sequence that includes a battery health check. If the BMS handshake is not yet accepted — which can happen on the very first boot with a new cell — the terminal may hang at the loading screen or restart before reaching the payment application. This is a timing issue, not a faulty battery. Power the terminal off completely, leave it for 30 seconds, then restart. One full boot-charge cycle resolves this in most cases.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal reboots mid-transaction during receipt printing\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe receipt printer motor draws a short, sharp current spike at the moment it fires — on a 3.7V cell at 1350mAh, that spike can push instantaneous draw above the BMS overcurrent threshold if the cell voltage is already sitting low. The BMS trips as a protection measure and the terminal resets. This is not a defective battery — it is a low state-of-charge issue triggering a protection event. Keep the terminal charged above 40% before high-volume transaction periods to stay clear of that threshold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415933517914,"sku":"BWCS-MPM100BL-1","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415933550682,"sku":"BWCS-MPM100BL-2","price":31.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415933583450,"sku":"BWCS-MPM100BL-3","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MPM100BL-1.webp?v=1779758086","url":"https:\/\/batteryweb.com\/products\/zebra-replacement-battery-37v-1350mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}