{"product_id":"zeco-v700-replacement-battery-144v-2000mah-ni-mh","title":"ZECO V700 Cordless Vacuum Compatible Battery 14.4V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZECO V700 — 14.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 2000mAh Ni-MH replacement battery for the ZECO V700 cordless stick vacuum. It fits directly into the V700 battery compartment and restores power to the motor and suction system. No OEM part number is published for this unit — the SKU reference is CS-KSB001VX.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV700 platform fit:\u003c\/strong\u003e\n    The V700 runs a 14.4V Ni-MH cell pack matched to its motor voltage rail and battery contacts. Substituting a different voltage or chemistry can trip the vacuum's onboard protection or damage the charge circuit — this cell matches both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through the V700's charge and discharge sequence. The BMS held cutoff correctly at low-voltage threshold, and charge acceptance across all cells remained consistent with rated capacity through initial cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging behaviour on the V700:\u003c\/strong\u003e\n    Do not leave the V700 sitting on its charging dock continuously. Cordless vacuums on permanent dock charge develop capacity fade significantly faster than those removed once full. Charge to full, then remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the V700\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells show a gradual voltage slope under load — the V700's indicator reads resting voltage, not load voltage. A partially blocked filter forces the motor to draw above rated current, which causes voltage to sag faster under load than the indicator predicts. The result is noticeably weaker suction while the indicator still shows charge remaining. Clean or replace the filter first, then check whether suction holds steady across a full floor run.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When suction is restricted — by a clogged filter or blockage in the head — the motor draws sustained current above the BMS threshold, which shuts the output to protect the cells. The pack recovers once current demand drops. Clear any blockage, check the filter, and confirm the motor runs without cutting out at full suction before assuming the battery is at fault.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428066689114,"sku":"BWCS-KSB001VX-1","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428066721882,"sku":"BWCS-KSB001VX-2","price":87.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428066754650,"sku":"BWCS-KSB001VX-3","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KSB001VX_1.webp?v=1779934037","url":"https:\/\/batteryweb.com\/products\/zeco-v700-replacement-battery-144v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}