{"product_id":"zimmer-ats-2000-replacement-battery-144v-5200mah-li-ion","title":"Zimmer ATS 2000 14.4V Replacement Battery 62240000600","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZimmer ATS 2000 \/ 4000TS Series — 14.4V Li-ion Replacement Battery (62240000600)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V Li-ion battery at 5200mAh (74.88Wh) replaces the power cell in the Zimmer ATS 2000 surgical system. It fits the ATS 2000, 4000TS, ATS 2200, and ATS 2200TS handpieces used in orthopedic bone cutting and drilling procedures. OEM part numbers 62240000600 and 60-4000-702-00 confirm fitment.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eATS 2000 \/ 4000TS platform compatibility:\u003c\/strong\u003e\n    These models share a common 14.4V power rail, connector footprint, and BMS handshake protocol. The same cell pack services the full lineup, so one battery covers multiple handpieces in a facility's rotation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge, discharge, and load cycling on ATS-series hardware. The BMS completed communication handshake, accepted full charge without fault codes, and held voltage under sustained motor load without triggering an over-current cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eSurgical self-test protocol:\u003c\/strong\u003e\n    After installing this battery, allow the ATS handpiece to complete its full power-on self-test without interruption. The BMS runs a verification cycle at startup — cutting power mid-sequence registers a false battery fault that persists until the next clean reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLow battery alarm on the ATS 2000 immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe ATS BMS holds a chemistry threshold calibrated to OEM cell behaviour. A new replacement cell has not yet completed a learn cycle, so the BMS reads state-of-charge conservatively and may trip the low-battery alarm even at full capacity. This is not a faulty cell — the charge IC is applying a conservative ceiling on the first charge. Run one complete charge-to-discharge cycle before clinical use. After that cycle, the BMS recalibrates its threshold and the alarm clears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eATS handpiece fails to power on after battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If the resting voltage drops below approximately 2.5V per cell, the ATS BMS enters protective lockout and blocks power delivery entirely. The device will show no response — no display, no motor activation. Place the battery on charge for a minimum of 30 minutes before attempting to power the handpiece. Most BMS recovery circuits re-initialise once the cell voltage climbs above the lockout threshold, typically around 3.0V per cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381457420378,"sku":"BWCS-ZTS200MD-1","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381457453146,"sku":"BWCS-ZTS200MD-2","price":96.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381457485914,"sku":"BWCS-ZTS200MD-3","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZTS200MD-1.webp?v=1778901015","url":"https:\/\/batteryweb.com\/products\/zimmer-ats-2000-replacement-battery-144v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}