{"product_id":"zoef-robot-sjaan-replacement-battery-144v-3000mah-li-ion","title":"Zoef Robot Sjaan 14.4V Cordless Vacuum Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZoef Robot Sjaan — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V 3000mAh Li-ion battery is a direct replacement for the Zoef Robot Sjaan robotic vacuum cleaner. It slots into the Sjaan's battery bay and restores autonomous floor-cleaning operation without replacing the full unit. Capacity is 3000mAh (43.2Wh) — sourced from the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSjaan platform fit:\u003c\/strong\u003e\n    The Sjaan runs a 14.4V battery architecture with a BMS that monitors cell voltage and current draw from the drive motors and suction unit simultaneously. This replacement cell matches that voltage rail and carries a compatible BMS profile to pass the handshake on first boot.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through sustained motor load replicating the Sjaan's dual-motor draw — navigation drive and suction combined. The BMS held stable cutoff thresholds and did not trip during normal operating current.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline for the Sjaan:\u003c\/strong\u003e\n    Do not leave the Sjaan sitting on its charging dock continuously between sessions. Robot vacuums on permanent dock contact trickle-charge the cell indefinitely, which accelerates capacity fade. Charge to full and lift it off the dock until the next run.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the Sjaan\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Sjaan's suction motor draws significantly more current when the filter is partially blocked — sometimes two to three times rated draw. Under that load, cell voltage sags earlier than the indicator predicts, because the indicator reads resting voltage, not load voltage. The BMS reads the real-time drop and reduces power delivery before the display catches up. Clean the filter before assuming the battery is at fault — a clear filter drops motor current back to spec and the voltage sag disappears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out and recovering mid-clean cycle\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA pattern of cutting out then restarting — rather than a steady power loss — points to a BMS overcurrent trip, not cell failure. When the Sjaan's suction path is restricted by debris or a clogged brush roll, the motor stalls briefly and current spikes hard. The BMS interprets that spike as a fault and interrupts power; once current drops, it resets automatically. Clear the brush roll, check the inlet for blockage, and confirm the filter is seated correctly — that usually stops the trip cycle without any further action.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428007379034,"sku":"BWCS-CNS129VX-1","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428007411802,"sku":"BWCS-CNS129VX-2","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428007444570,"sku":"BWCS-CNS129VX-3","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CNS129VX-1.webp?v=1779933824","url":"https:\/\/batteryweb.com\/products\/zoef-robot-sjaan-replacement-battery-144v-3000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}