{"product_id":"zondan-apollo-n3-replacement-battery-111v-2600mah-li-ion","title":"Zondan Apollo N3 Replacement Battery LI13S001A 11.1V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZondan Apollo N3 — 11.1V Li-ion Replacement Battery (LI13S001A)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V, 2600mAh lithium-ion battery replaces part number LI13S001A in the Zondan Apollo N3 portable medical device. It matches the original voltage, capacity, and connector configuration. Dimensions are 68.00 × 36.00 × 34.40mm — confirm these against your existing cell before fitting.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApollo N3 platform fit:\u003c\/strong\u003e\n    The Apollo N3 uses a dedicated BMS handshake that reads cell voltage and chemistry at startup. This replacement matches the 11.1V three-cell Li-ion configuration the device expects, so the handshake completes without a fault code.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge under the Apollo N3 load profile. The BMS accepted the cell on first insertion, completed the self-test sequence, and held voltage within the device's operating window throughout the test run.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting, let the Apollo N3 complete its full power-on self-test without interruption. The device runs a BMS verification at startup — cutting power mid-sequence logs a false battery fault that will persist until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Apollo N3 may not complete its boot sequence on a new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Li-ion cell often sits at a partial state of charge after storage and shipping. The Apollo N3 boot sequence checks cell voltage against a minimum threshold before allowing full startup. If the resting voltage is below that threshold — typically under 10.5V for an 11.1V three-cell pack — the device halts mid-boot. Charge the battery fully before the first installation, then allow the device to boot without touching the power button.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator not reaching 100% on the first charge cycle\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge, the Apollo N3's charge IC applies a conservative current limit to a new cell. This extends the time to full charge and sometimes leaves the indicator stuck at 95–99% for an extended period. The cell is not faulty — the charge IC re-calibrates after one full charge-discharge cycle. Run the battery down to the low-battery alarm, recharge fully to 12.6V, and the indicator should read correctly from the second cycle onward.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381447884890,"sku":"BWCS-ZAN300MD-1","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381447917658,"sku":"BWCS-ZAN300MD-2","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381447950426,"sku":"BWCS-ZAN300MD-3","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZAN300MD-1.webp?v=1778900958","url":"https:\/\/batteryweb.com\/products\/zondan-apollo-n3-replacement-battery-111v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}