{"product_id":"zte-ac70-replacement-battery-37v-4800mah-li-ion","title":"ZTE AC70 Mobile Hotspot Compatible Battery 3.7V 4800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZTE AC70 — 3.7V Li-ion Replacement Battery (Li3752T42P5h683719)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 4800mAh Li-ion replacement battery for the ZTE AC70 portable Wi-Fi hotspot. It slots directly into the AC70 and restores power to a device that has stopped holding a useful charge. Capacity is rated at 17.76Wh — matching the original cell specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAC70 hotspot compatibility:\u003c\/strong\u003e\n    The AC70 runs a combined cellular modem and Wi-Fi radio off a single 3.7V cell. This battery matches that voltage rail and the connector pinout, so the device BMS reads state-of-charge correctly and does not flag a fault on boot.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell on the AC70 under a simulated multi-device Wi-Fi load with cellular active. The BMS accepted the battery without error, reported accurate charge percentage, and held voltage across the full discharge curve without mid-cycle cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eVentilation during extended sessions:\u003c\/strong\u003e\n    Keep the AC70 on a hard, open surface when it is running for long stretches. The cellular radio pushes to maximum transmit power in weak-signal areas, and heat builds fast in an enclosed space — that sustained heat degrades Li-ion cells faster than discharge cycles alone.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the AC70 drops connections mid-session under full load\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the AC70 is serving the maximum number of connected devices, the combined draw from the cellular modem and the Wi-Fi radio can cause a momentary voltage sag on the battery rail. An aging or partially degraded cell cannot hold voltage steady under that spike, so the BMS interprets it as a low-battery event and initiates a soft shutdown. A fresh cell with intact internal resistance handles the combined load without the voltage dropping below the BMS cutoff threshold. Replacing the battery is the fix — the hardware itself is not the cause.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eAC70 won't power on after sitting unused for several weeks\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge slowly during storage. If the AC70 sat unused long enough, the battery may have dropped below the minimum boot voltage the device requires to initialise — typically around 3.0V for a 3.7V nominal cell. At that level, the BMS locks the cell to prevent damage and the device shows no response at all, even on charge. Connect the AC70 to its original charger and leave it for at least 30 minutes before attempting to power on — the charger will trickle current into the cell until it recovers above the BMS unlock threshold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377832624218,"sku":"BWCS-ZAC700SL-1","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377832656986,"sku":"BWCS-ZAC700SL-2","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377832689754,"sku":"BWCS-ZAC700SL-3","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZAC700SL-1.webp?v=1778773895","url":"https:\/\/batteryweb.com\/products\/zte-ac70-replacement-battery-37v-4800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}