{"product_id":"zte-blade-a31-2021-replacement-battery-38v-2500mah-li-ion","title":"ZTE Blade A31 2021 Compatible Battery Li3830T43P8H486375 3.8V 2500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eZTE Blade A31 2021 — 3.8V Li-ion Replacement Battery (Li3830T43P8H486375)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 2500mAh Li-ion cell built to replace the original battery in the ZTE Blade A31 2021 smartphone. It matches the OEM part number Li3830T43P8H486375 and fits the physical dimensions of the Blade A31 2021 battery bay at 75.60 × 63.00 × 4.70mm. When the original cell degrades and can no longer hold a stable charge, this replacement restores normal device operation.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBlade A31 2021 fit:\u003c\/strong\u003e\n    The Blade A31 2021 uses a fixed voltage rail at 3.8V nominal. The BMS in this device handshakes with the cell over a single thermistor line. Any cell that deviates from the expected impedance profile at that voltage will trigger charge interrupts or refuse to negotiate fast charging on the first cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through a full discharge-to-charge sequence on the Blade A31 2021 platform. The BMS accepted the cell without fault flags, and the charge IC stepped through trickle, CC, and CV phases without cutoff errors.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    On first use after installation, disable fast charging for one complete discharge-charge cycle. The fuel gauge IC in the Blade A31 2021 is calibrated to the discharge curve of the original cell. Running one slow cycle at standard current lets the coulomb counter recalibrate before fast charging applies higher current to an uncalibrated cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Blade A31 2021 after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC is still reading the old cell's discharge curve. The new cell hits a voltage cliff — typically around 3.5V under modem or display load — before the reported percentage reaches zero. The phone shuts down because the hardware voltage floor trips before the software percentage does. Run one full discharge down to automatic shutdown, then charge uninterrupted to 100% at standard charge rate to re-anchor the coulomb counter to the new cell's curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDevice won't power on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells in storage self-discharge over time. If the cell voltage drops below approximately 2.5V, the BMS enters a lockout state and blocks normal charge current to protect the cell. The Blade A31 2021 will show no response — no boot logo, no charging indicator — when connected to power in this state. Connect the phone to a wall charger rated at 5V and leave it for 15–30 minutes before attempting to power on; the charge IC will apply a low trickle current that recovers the cell voltage above the BMS re-enable threshold of around 2.8V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391803555930,"sku":"BWCS-ZTA312SL-1","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391803588698,"sku":"BWCS-ZTA312SL-2","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391803621466,"sku":"BWCS-ZTA312SL-3","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZTA312SL-1.webp?v=1779142198","url":"https:\/\/batteryweb.com\/products\/zte-blade-a31-2021-replacement-battery-38v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}