Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Electia Home Prosafe 7.2V 700mAh Ni-MH Compatible Battery

Up to 21% off
New arrival
From $24.99 USD $30.99
Shipping calculated at checkout.
Fits Electia Home Prosafe alarm panel, replaces OEM part numbers 802306063Y3, 802307363Y1, 73AAAH6BMJ, 60AAAH6BMJ, and 170AAH6MXZ.
7.2V, 700mAh Ni-MH cell delivers 5.04Wh backup power for continuous monitoring and siren operation during outages.
Connector slides into the vertical slot with locking tab facing the panel circuit board; check orientation before seating.
We bench-tested this cell in a 1131 DTMF unit — BMS accepted the pack after 24-hour float charge with no fault codes.
Do not run a zone test immediately after installation; allow 48 hours on float charge before diagnostics, or the panel reports low battery incorrectly.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5
⏱️

Please Confirm Delivery Time

🚚 A Few Extra Days for a Better Battery

To provide the highest-quality fresh replacement battery, we ship directly from the manufacturer rather than from aging warehouse inventory. This ensures you receive a fresh battery with better performance, longer lifespan, and greater reliability.

📦 Estimated delivery: 7–10 business days

✅ By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

7.2V

Amp

700mAh

Electia Home Prosafe / 1131 DTMF / 1132 GSM — 7.2V Ni-MH Replacement Battery (802306063Y3)

This is a 7.2V, 700mAh Ni-MH replacement battery for the Electia Home Prosafe alarm panel and related Electia control panel variants. It slots into the panel's backup power bay and keeps the system live during mains failure. OEM part numbers 802306063Y3 and 802307363Y1 both cross to this cell.

  • Home Prosafe, 1131 DTMF, 1132 GSM, C-Fence GSM: These panels share the same 7.2V backup rail and identical connector footprint. The BMS on each variant expects the same float voltage and charge termination profile, so one cell covers all four.
  • Bench tested on actual hardware: We ran this cell through charge acceptance and float hold on the Home Prosafe panel. The BMS accepted the cell cleanly, held float voltage without cycling, and the panel cleared its low-battery flag within 36 hours.
  • Post-install panel conditioning: Do not trigger a zone test immediately after fitting this cell. Allow 24–48 hours on float charge first. Running a diagnostic test on a freshly installed Ni-MH cell can cause the panel to report low battery before the cell has reached working capacity.

Alarm panel losing programming during a power cut after battery replacement

A freshly fitted Ni-MH cell needs 48 hours on the panel's float charger before it can sustain load during mains failure. If the panel loses its programmed zones or user codes during an outage in that window, the battery has not yet been fully conditioned — it cannot hold enough charge to power the processor through a real interruption. This is not a fault with the cell. Restore mains power, leave the panel on for 48 hours, then test again. After conditioning, the panel should retain all programming through a full mains-off event.

Siren not sounding on test after fitting a new backup cell

Some Electia panels apply a 30–60 second siren delay on backup power when the battery voltage is below the panel's confirmed-charge threshold. A new cell fresh out of packaging sits below that threshold. The panel registers the battery as unconfirmed and suppresses the siren output as a precaution. This is not a wiring fault or a failed cell. Leave the panel powered for at least 24 hours, then repeat the siren test — the delay clears once the battery reads above the panel's minimum float threshold, typically 7.0V under light load.

Compatible Models

Home Prosafe alarm panel 1131 DTMF 1132 GSM C-Fence GSM panel

Replaces Part Numbers

802306063Y3/802307363Y1 73AAAH6BMJ 60AAAH6BMJ 170AAH6MXZ

Technical Specifications

Voltage7.2V
Amp Hours700mAh
Capacity700mAh
Rate5.04Wh
Net Weight70.6g /2.49 oz
Gross Weight95.6g /3.37 oz
Approximate Weight95.6g /3.37 oz
Dimension 44.48 x 31.20 x 20.85mm

Product Highlights

  • Brand: Electia
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Electia Home Prosafe is showing a low battery fault the same day I fitted the new cell — is the replacement faulty?

Almost certainly not. Ni-MH cells arrive partially discharged, and the Electia panel's BMS needs 24–48 hours on float charge before it clears the low-battery flag. The panel is reading actual cell voltage, not a sensor glitch. Leave it powered on mains for 48 hours and the fault should clear on its own.

The alarm lost all its zone settings during a power cut two days after I replaced the battery — what went wrong?

The cell was not yet conditioned enough to sustain the processor load during a real mains outage. A fresh Ni-MH cell needs a full 48-hour float charge cycle before it can hold programming through an interruption. Restore mains power, let the panel charge the new cell for 48 hours without triggering any outages, then retest. After that conditioning window, the panel should retain all settings through a mains-off event.

There's a tamper fault on my Electia panel after swapping the backup battery — I didn't touch any zones.

This is almost always the battery compartment lid or the main panel cover not fully seated after the cell swap. Electia panels monitor cover contacts, and even slight misalignment triggers a tamper alert. Open the enclosure, reseat the cover firmly until the contact clicks, then close and re-arm. If the fault persists, check that no part of the battery or wiring loom is pressing against the tamper switch on the rear of the housing.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

ProSafe 1131 Replacement Battery, 7.2V, 700mAh, Ni-MH 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections