Nokia 5 HE336 Replacement Battery 3.85V 2900mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Nokia 5 HE336 Replacement Battery 3.85V 2900mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Nokia 5 HE336 Replacement Battery 3.85V 2900mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.85V
Amp
2900mAh
Nokia 5 / 5 Dual SIM — 3.85V Li-Polymer Replacement Battery (HE336 / HE321)
This is a 3.85V, 2900mAh Li-Polymer replacement battery for the Nokia 5 and Nokia 5 Dual SIM smartphones. It covers all regional variants including TD-LTE and LATAM models. Fits where OEM parts HE336 and HE321 are listed.
- Nokia 5 variant coverage: All Nokia 5 Dual SIM variants — standard, TD-LTE, and LATAM — share the same battery bay dimensions, connector pinout, and BMS communication protocol. One cell fits the full lineup without modification.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a Nokia 5 unit. The BMS handshake completed correctly, charge current stepped down as expected near full capacity, and the protection circuit tripped cleanly at the low-voltage threshold.
- Fuel gauge recalibration on first use: After installation, disable fast charging and run one full discharge-to-charge cycle at standard rate. This lets the fuel gauge IC map the new cell's discharge curve before fast charge pushes high current into an uncalibrated cell — preventing early percentage jumps.
Sudden shutdown at 20–30% on the Nokia 5 after a cell swap
The Nokia 5 fuel gauge IC retains the discharge curve of the previous cell in memory. When a new cell with a different internal impedance is installed, the IC misreads the actual state of charge. Under peak loads — mobile data handoff, screen-on burst — the new cell's voltage drops faster than the IC predicts, and the phone shuts down before the displayed percentage reaches zero. One full discharge cycle from 100% to auto-off, then a full charge, resets the coulomb counter against the new cell's actual curve. After that cycle, shutdown behaviour at low charge normalises.
USB fast charge not activating on the first cycle after replacement
On first connection after installation, the Nokia 5 charge IC may negotiate only standard 5V charging rather than the higher voltage fast-charge profile. This happens because the BMS on a new cell defaults to a conservative handshake until it has completed one initialisation cycle with the host device. Plug in using the original Nokia charger and allow the first charge to complete fully at whatever rate the phone accepts. Fast charge negotiation typically activates correctly on subsequent connections once the BMS and charge IC have exchanged a full session.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Nokia
- Manufacturer: CS
- Series: X-Longer
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Nokia 5 shows 25% battery then just switches off — is the new battery faulty?
It is not faulty. The fuel gauge IC inside the Nokia 5 is calibrated to the old cell's discharge curve, so it misjudges how quickly voltage drops under load on a fresh cell. Under modem or screen load, the new cell's voltage sags past the shutdown threshold before the displayed percentage catches up. Run one uninterrupted discharge from 100% to automatic shutdown, then charge fully without interruption — the coulomb counter resets against the new cell and the cutoff point shifts back to the correct range.
The battery percentage on my Nokia 5 jumps around erratically after I put the new cell in — what causes that?
The Nokia 5 fuel gauge IC uses a stored discharge model to estimate state of charge. A replacement cell has different internal impedance characteristics than the aged original, so the IC's estimates are off until it has enough data to recalculate. The percentage stabilises after one or two complete discharge-charge cycles at standard charge rate — each cycle gives the IC a full set of voltage and current data to refine its model. After two cycles, erratic jumping typically stops.
My Nokia 5 won't power on at all after the replacement battery sat unused in the phone for a few weeks — how do I recover it?
If the cell discharged below approximately 2.5V during storage, the BMS enters a lockout state to prevent damage and the phone will not respond to a normal power button press. Connect the phone to a wall charger — not a PC USB port — and leave it for at least 20–30 minutes without pressing anything. The charge IC trickle-charges the cell up through the BMS recovery threshold; once voltage clears roughly 3.0V, the BMS unlocks and normal charging resumes. If the charge indicator light does not appear within 45 minutes, try a different cable and confirm the charger outputs at least 1A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




