IMET MICRON BE7000 Crane Remote Compatible Battery 6V 1200mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
IMET MICRON BE7000 Crane Remote Compatible Battery 6V 1200mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
IMET MICRON BE7000 Crane Remote Compatible Battery 6V 1200mAh - is backordered and will ship as soon as it is back in stock.
Voltage
6V
Amp
1200mAh
IMET MICRON — 6V Ni-MH Replacement Battery (BE7000)
This 6V, 1200mAh Ni-MH battery replaces the original pack in the IMET MICRON wireless crane remote control. It fits the MICRON transmitter used for overhead crane and industrial hoist operation. OEM part numbers BE7000, AS022, and AS035 all cross-reference this pack.
- MICRON transmitter fit: The MICRON platform runs a 6V Ni-MH cell block at a fixed voltage rail. The connector orientation, cell count, and BMS handshake are matched to the original IMET transmitter housing — no modification needed to seat the pack.
- Bench tested on actual hardware: We cycled this battery through transmitter power-on, solenoid activation sequences, and repeated E-stop triggers. The BMS held without dropout across full discharge cycles, and voltage recovery after load spikes stayed within MICRON operating range.
- Monthly charge during idle periods: Crane remotes often sit unused for weeks between jobs. Ni-MH cells self-discharge at roughly 20–30% per month — if the pack drops too low, the transmitter will not power on even with fresh charge attempts. Run a full charge cycle once a month during any idle period.
Solenoid activation causing power dropout on a freshly installed battery
When the MICRON remote triggers a crane solenoid or relay, the inrush current spike is brief but sharp. A degraded or partially discharged Ni-MH pack can sag below the transmitter's minimum operating voltage at that exact moment, cutting power mid-command. This looks like a faulty remote but is actually a voltage-supply issue. Always charge the replacement pack to full before the first operational use — do not assume a new-out-of-box cell is at working voltage.
MICRON remote showing low-battery warning immediately after cell swap
Ni-MH cells ship at storage voltage — typically 1.0–1.1V per cell, which puts a 6V pack at roughly 5.0–5.5V total. The MICRON transmitter reads this as a low or critically low state and flags the warning straight away. This is not a faulty battery. Connect the pack to the IMET charger and run a full charge cycle until the charger confirms complete. Voltage should sit at or above 7.2V at charge termination before the pack goes back into the remote.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: IMET
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My IMET MICRON crane remote won't power on at all after sitting unused for a few months — is the battery dead?
Ni-MH cells self-discharge steadily during storage, and a pack left uncharged for several months can drop low enough that the transmitter sees no usable voltage on power-on. Connect the battery to the IMET charger before assuming it has failed — leave it on charge for at least 30 to 60 minutes to allow the cells to recover from deep self-discharge. If the charger light confirms a charge cycle completes normally, the remote should power on. Check cell voltage at the pack terminals: a recovered pack should read at or above 6V before re-installing.
The crane remote cuts out mid-operation right when a hoist movement is triggered — it powers back on seconds later.
This is a voltage-sag dropout at the moment of solenoid or relay inrush. The current spike when activating a hoist movement briefly pulls the transmitter's supply voltage below its cutoff threshold, causing the MICRON to reset. It happens most often when the battery is not at a full state of charge. Charge the pack completely before each shift — a full Ni-MH pack handles inrush demand without sagging below the transmitter's operating floor.
The E-stop response on the MICRON remote feels slower than it used to — could the battery cause that?
E-stop signal transmission in crane remotes is voltage-dependent — a low or degraded pack increases latency between button press and solenoid trip because the transmitter's RF output power drops with supply voltage. A weakened Ni-MH pack that reads "charged" on the indicator but holds less actual capacity will show this symptom under real load. Cycle the old pack fully and measure terminal voltage under load; if it sags below 5.5V during transmission, replace the cell. Always charge the new pack to full before any safety-critical lift.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
